10. Using the Tripod Mount (Sold separately)

Adjusting the Revolving Mount

This lens can be used with the C (W II) tripod mount ring, sold separately.

You can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a particular camera model for switching between vertical and horizontal positions.

Detaching

Use the following procedures to remove and attach the tripod mount.

Turn the locking knob

With the collar open,

To install, while pulling the

counterclockwise until it

remove the tripod mount.

locking knob, bring the collar

becomes loose (about 3 turns),

 

to the original position, and

and pull the knob in the direction

 

tighten the locking knob

of the arrow to release the collar.

 

securely.

Depending on the EOS camera model, if a battery pack or vertical grip is attached, the tripod mount may bump into it. If that is the case, remove the battery pack/vertical grip or the tripod mount.

The tripod collar can be attached to or detached from the lens while the lens is attached to the camera.

ENG-12