•If the camera’s Custom Function is used to alter the AF activation method, the Image Stabilizer will be activated by the altered method.

•Before shooting, look through the viewfinder and check that the image has been stabilized.

•The Image Stabilizer operates normally even with Extender EF 1.4⋅ ll attached.

•With Extender EF2⋅ II attached to the lens, the Image Stabilizer will work with the following cameras:

EOS-1Ds Mark II, EOS-1Ds, EOS-1D Mark II N, EOS-1D Mark II, EOS-1D, EOS 5D, EOS 30D, 20D, 20Da, 10D, DIGITAL REBEL XTi/400D DIGITAL, DIGITAL REBEL XT/350D DIGITAL, DIGITAL REBEL/300D DIGITAL, D60, D30, EOS DCS1, DCS3, D2000, D6000, EOS-1V/HS, EOS-1N/DP/HS/RS, 3, ELAN 7E/ELAN 7/30/33, ELAN 7NE/ELAN 7N/30V/33V, ELAN II/ELAN IIE/50/50E, REBEL X/REBEL XS/500, REBEL G/500N, REBEL 2000/300, REBEL Ti/300V, REBEL T2/300X, REBEL K2/3000V, IX, IX Lite/IX7, 3000/88, 5000/888

Notes for Image Stabilizer Mode 1

• The Image Stabilizer may not be effective in the following cases:

1During camera movement such as panning.

2During picture-taking on a moving boat, car, etc.

Note for Image Stabilizer Mode 2

• Use this mode only for panned shots, etc. Normally, use Image Stabilizer Mode 1.

ENG-8