3. Hood (Sold Separately)
The
1)Screw the hood adapter onto the filter mounting thread of the lens.
2)Attach the hood to the hood adapter ❺ .
The hood can be reverse-mounted on the lens for storage.
4. Filters (Sold Separately)
You can attach filters to the filter mounting thread on the front of the lens.
•Only one filter may be attached.
•When using the hood, screw the filter onto the hood adapter.
•Use a polarizing Canon filter (52mm).
Specifications
Angle of | Diagonal | 46° | |
Vertical | 27° | ||
View | |||
Horizontal | 40° | ||
| |||
Lens Construction | 5 groups, 6 elements | ||
Minimum Aperture | f/22 | ||
Min. Focusing Distance | 0.45 m/1.5 ft. | ||
Max. Magnification and | 0.15×/160 × 240 mm/6.3 × | ||
Field of View |
| 9.4 inch (at 0.45 m/1.5 ft.) | |
Filter Diameter/Usable | 52 mm/1 | ||
Number |
| ||
|
| ||
Max. Diameter and Length | 68.2 × 41 mm | ||
2.7 × 1.6 inch | |||
|
| ||
Weight |
| 130 g/4.6 oz | |
Hood |
|
| |
| sold separately) | ||
|
| ||
Case |
| LP1014 (sold separately) | |
QThe lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm when including the lens cap and dust cap.
QThe size and weight listed are for the lens only, except as indicated.
QAperture settings are specified on the camera.
QAll data listed is measured according to Canon standards.
QProduct specifications and appearance are subject to change without notice.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian
| © CANON INC. 1996 | 2008.5 |