3. Hood (Sold Separately)

The ES-52 hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust.

When attaching the hood, securely attach it to the filter mounting thread (ø52mm) on the front of the lens, or to the thread (ø52mm) on the front of the filter that is already fitted to the lens (excluding older Canon circular polarizing filters that do not have a filter mounting thread on the front) ❹ .

Part of the picture may be blocked if the hood is not attached properly.

4. Filters (Sold Separately)

You can attach filters to the front of the lens, or to the filter mounting thread (ø52mm) on the front of the hood.

●Only one filter may be attached.

●Use the Canon Circular Polarizing Filter PL-C B (ø52mm) as the polarizing filter.

●You can use hoods and filter attached in any order.

5.Extension Tubes (Sold Separately)

You can attach extension tube EF12 II or EF25 II for magnified shots. For shooting distance and magnification, see the extension tube specifications.

MF mode is recommended for accurate focusing.

●The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm when including the lens cap and dust cap.

●The extenders cannot be used with this lens.

●The close-up lenses cannot be used with this lens. (The end of the lens will become heavy, causing the focus to become unstable.)

●CASE (Sold Separately) LP811

❹●

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Consult the dealer or an experienced radio/TV technician for help.

 

 

 

 

 

 

 

 

Extension Tube Specifications

 

Magnification

 

Focusing Distance Range

 

 

 

 

 

 

 

 

(Sold Separately)

 

 

 

(X)

 

 

(mm) (inch)

 

 

 

 

 

 

 

 

 

EF40mm f/2.8 STM

 

EF12 II

 

0.32-0.50

 

 

175-217 (6.9-8.5)

 

 

 

 

 

 

 

 

 

 

EF25 II

 

0.70-0.88

 

 

156-164 (6.1-6.5)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* Sold Separately

 

 

Angle of view

 

Lens

Minimum

Max.

Min. focusing

Filter diameter

 

Max. diameter and length

Weight

Hood*

Lens Cap

 

Case*

 

Diagonal

Vertical

Horizontal

construction

aperture

magnification

distance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EF40mm f/2.8 STM

57°30’

34°

49°20’

4-6

22

0.18x

0.3m/0.98ft

52mm

 

68.2x22.8mm (2.7”x0.9”)

130g/4.6oz.

ES-52

E-52

 

LP811

CT1-8581-000

1205SZ

© CANON INC. 2012