Display Language
Change the display language as needed.
1 Enter Playback mode.
zzPress the <1> button.
2 Access the setting screen.
zzPress and hold the <m> button, and then immediately press the <n> button.
3Set the display language.
zzPress the <o><p><q><r> buttons to choose a language, and then press the <m> button.
zzOnce the display language has been set, the setting screen is no longer displayed.
• The current time is displayed if you wait too long in step 2 after pressing the <m> button before you press the <n> button. In this case, press the <m> button to dismiss the time display and repeat step 2.
•You can also change the display language by pressing the <n> button and choosing [Language 
] on the [3] tab.
Still Images | Movies |
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
1Turn the camera on.
zzPress the power button.
zzThe startup screen is displayed.
2 Enter [
] mode.
zzSet the mode switch to [4].
zzPress the <m> button, press the
<o><p> buttons to choose [
], and then press the <m> button again.
zzPress the <o><p> buttons to choose
[
], and then press the <m> button.
zzAim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
zzIcons representing the scene and image stabilization mode are displayed in the upper right of the screen.
zzFrames displayed around any detected subjects indicate that they are in focus.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
PMode Playback Mode
14