Notes About the Live View Image

Under low or bright light conditions, the Live View image might not reflect the brightness of the captured image.

If the light source within the image changes, the screen might flicker. If this happens, stop and resume the Live View shooting under the actual light source to be used.

If you point the camera in a different direction, it might throw off the Live View image’s correct brightness momentarily. Wait until the brightness level stabilizes before shooting.

If there is a very bright light source in the picture, such as the sun, the bright area might appear black on the LCD monitor. However, the actual captured image will correctly show the bright area.

In low light, if you set the [6LCD brightness] to a bright setting, chrominance noise may appear in the Live View image. However, the chrominance noise will not be recorded in the captured image. When you magnify the image, the image sharpness may look more pronounced than it really is.

About the <E> icon

If the camera’s internal temperature becomes high, the <E> icon may appear on the screen. If you then continue with Live View shooting, the image quality might degrade. You should stop Live View shooting and allow the camera to rest.

If Live View shooting continues while the <E> warning icon is displayed and the camera’s internal temperature increases, the Live View shooting will stop automatically. Live View shooting will be disabled until the camera’s internal temperature decreases.

121