
Canon EOS 620 - 650 camera manual
3)If battery voltage is sufficient, remove the battery from the battery chamber and reinstall
it.
4)Release the shutter once.
If the blinking "be" disappears, the camera has returned to normal condition and you can keep shooting. If it does not disappear after repeating these operations several times, there has been a camera malfunction and the camera needs repair. Take the camera to the nearest Canon Service Facility
3. Lithium Battery Pack (1)
This camera uses one,
·After loading a new battery
·After prolonged storage
·If the shutter will not release
·Shooting in low temperatures
·Before shooting important events
1)Wipe the battery terminals and the camera contacts with a clean, dry cloth before loading to ensure proper contact.
2)Remove the battery if you do not expect to use the camera for about three weeks or longer.
3)Battery performance deteriorates slightly in temperatures below 0°C/32°F. Keep the camera and a spare battery pack close to your body or in a pocket to keep them warm until you are ready.
Battery may explode or cause burns if disassembled, recharged, shorted or exposed to high temperature or disposed in fire.
4. Lithium Battery Pack (2)
Even if one blinking bar mark or no bar mark appears in the display panel during battery check, exposure will be correct as long as the shutter releases. Automatic wind and rewind, however, may not be possible because of insufficient battery power.
Also, if the camera stops during wind or rewind all the film transport bars start blinking to warn you. Automatic rewind
5. X-ray examinations at Airports
Film passing through
Appendix
1. LCD Panel Display