Easy Connection via WPS (PBC Mode)
3 Select a Web service.
Select a Web service to connect to, then press <0>.
The contents and ordering of the list of items displayed will vary depending on settings.
The Web service to connect to can be changed later (p.126).
XWhen [ 
] (Email) is selected, a list of registered addresses is displayed (p.125).
4Select [WPS (PBC mode)].
Press the <V> key to select [WPS (PBC mode)], then press <0>. Select [OK] and press <0> to go to the next screen.
5onnect to the access point.
Press the access point’s WPS button. For details about where the button is located and how long to press it, refer to the access point’s instruction manual. Select [OK] and press <0> to establish a connection with the access point.
XWhen a connection with the access point is established, the [IP address set.] screen is displayed.
6 Set the IP Address.
Press the <V> key to select how the IP address should be set, then press <0>.
Select [OK] and press <0> to go to the next screen.
108