1 Unpack the Printer
2 Prepare the Printer
Start Here
Easy Setup Instructions
3 Install the Print Head
| i455Series |
| Desktop Photo Printer |
4 Install the Ink Tanks | Connect the Printer |
5 and Load Paper |
1Carefully remove all items from the box.
i455 Series
Desktop Photo Printer
Paper Rest
1Remove all shipping tape from the front and back of the printer.
Shipping
Tape
2Plug the power cord into the back of the printer and connect the other end to a power outlet.
3Press the Power button. The printer will initialize.
1Remove the print head from its package.
Tear at notch to open
2Remove the orange protective cap.
NOTE: Do not touch the electrical contacts or the print head nozzles.
Electrical
Contacts
Print Head
Nozzles
3Raise the gray lock lever on the printer.
1Remove the black ink tank
NOTE: Avoid ink at the bottom of the tank.
Protective Cap
2Insert the black ink tank into the slot on the right, then push in until the ink tank clicks into place.
IMPORTANT: For correct printer operation, make sure ink tanks are secure in slots.
1Turn the printer off.
IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready.
2Connect one end of a USB cable to the computer, the other to the printer.
Documentation and Software Kit
Power
PowerLamp Button
4Open the output tray, then open the front cover. The print head holder automatically moves to the center.
4Slide the print head into the holder until it is securely seated.
Do not press it down.
Click |
3Repeat the procedure for the color ink tank
USB Port
USB Cable
3Pinch the paper guide and slide it to the left. Load a sheet of blank paper in the paper rest. Slide the guide toward the left edge of the paper.
i 455 Series Print Head | Power Cord |
Ink Tanks
Front Cover
Output Tray
Serial Number
5Write down the serial number located to the right of the print head holder. You will need this later to register the product.
5Lower the lever until it clicks into place.
Click |
4Close the front cover, attach the paper rest and pull out the output tray.
Paper Rest
Output Tray
NOTE: The printer will perform a print head cleaning after the cover is closed.
Paper
Guide
Continue with Step 6 on side two.