AT Canon ip3000 CISS Instruction
Thank you for purchasing AT Continuous Ink Supply System. We appreciate your support and
will try our best to make your experience with our products a pleasant one. Printing has been a
different experience ever since you installed AT Continuous Ink Supply system on your own
printer. Just imagining being able to print without regard to the ink level in those expensive little
cartridges.
Please take your time installing AT Continuous Ink Supply system. Do not remove your old
cartridge until you have the AT CIS system primed and ready to install (to prevent the drying of
heads). In addition, make sure you are getting perfect nozzle checks before installing the AT
CIS system. The AT CIS system wont be able to work properly if the nozzles are previously
clogged.
Most people get a perfect nozzle check the first time after installing the AT Continuous Ink
Supply system; others may need to run two or three cleaning cycles or let the printer sit for a
while before they get the perfect results.
1. General Guide:
1) Components
A. CIS system 1 set
B. Air filters 4 pcs
C. Support Arm 1 set
D. Refill Kit 4pcs
E. Instruction CD 1 pc
2) Opening box inspection
aCheck whether all the accessories are ready.
bCheck whether there's the leakage of the CISS, whether some tubes have been separated from the
CISS, whether there are air bubbles in the tube (If there exists more than 20CM air space, please kindly to
contact with the local dealer)