3-4. Verification Items
(1) Service test print
<EEPROM information contents>
On the service test print (sample below), confirm the EEPROM information as shown below. (The information is given in the upper portion of the printout.)
iP4200: Model name
JPN: Destination
Vx.xx: ROM version
USB (xxxxxx): USB serial number
FA = xx xx xx: Reserved for plant use
D = xxx.x: Waste ink amount (%)
CDR (+xxxxx, +yyyyy): CD / DVD sensor position correction value
AB (K = OK Y = ...): Ink system check result
<Print check items>
On the service test print (sample below), confirm the following items:
-Check 1, top of form accuracy: The lines shall not extend off the paper.
-Check 2, EEPROM information
-Check 3, nozzle check pattern: Ink shall be ejected from all nozzles.
-Check 4, check pattern for uneven printing due to line feeding: There shall be no remarkable streaks or unevenness.
-Check 5, check pattern for uneven printing due to carriage movement (standard mode): There shall be no remarkable unevenness.
-Check 6, check pattern for uneven printing due to carriage movement (9600 dpi mode): There shall be no remarkable unevenness.
-Check 7, CD / DVD sensor and automatic print head alignment sensor correction: The results shall be OK.
