The Control Panel (Facsimile Control Panel)
The Facsimile Control Panel is attached only if the optional Super G3 FAX Board and Fax
For more information on using the Fax function, see the Facsimile Guide.
[Coded Dial] Key | [Address Book] Key | [Redial/Pause] Key |
Press to perform coded speed dialing. | Press to search for names or fax | Redial the three most recent |
| numbers registered for speed dialing, | destinations that was dialed |
| and then use the number for dialing. | manually using the numeric keys. |
|
| Press to insert a pause between |
|
| digits or after the entire fax number. |
[R] Key | [Delayed TX] Key | [Direct TX] Key |
Press to dial an outside line access | Press to set Delayed TX. | Press to set Direct TX. |
number or an extension number |
|
|
when the unit is connected through |
|
|
a switchboard (PBX). |
|
|
[Hook] Key
Press to activate or deactivate the telephone line. This is necessary for dialing a fax information service.
[Stamp] Key
Press to apply a stamp on the front side of originals after they have been scanned, so that you can determine whether a document was scanned and send.
The Control Panel (Facsimile Control Panel)
Preface
Functions
Copying
[Fax] Key
Coded Dial | Address Book | Redial/Pause | Hook |
Press to switch to the Fax mode. |
|
|
|
R | Delayed TX | Direct TX | Stamp |
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
17 18 19 20
21~40 41~60
Press to use
OK
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 | # |
ID | C |
|
[Tone] Key
Press to switch temporarily to tone dialing when connected through a rotary pulse line. This enables you to access information services that only accept tone dialing.
Facsimile Functions
Other Useful Features