Canon L295 manual Press Start/Copy, XI Transmission Report setting

VSENDING TO MORE THAN ONE LOCATION

(SEQUENTIAL BROADCASTING)

USING ONE-TOUCH / CODED SPEED DIAL

1.Place documents face down on the Feeder

2.Press all the relevant one-touch / coded speed dialling numbers one right after another

3.Press Start/Copy ￿

4.Take note of “ TX / RX ” number

N.B. Please check on the MULTI TRANSACTION REPORT ** which will be generated out after the broadcast is completed to ensure that the broadcast is successful.

**To ensure that this report is churned out after the successful broadcast, the TX Report must be set to “OUTPUT YES” status. Please refer to :

XI TRANSMISSION REPORT setting

9