●If you want to set RAW:
❑ Select [RAW] from [Protocol].
❑Click [Discover].
The [Select Printer] dialog box is displayed.
❑Select a printer ➞ click [OK].
The selected printer's IP address or host name is set for [IP Address or Host Name].
IMPORTANT
If you are using Windows XP Service Pack 2, not all printers shown in the [Select Printer] dialog box may be displayed. In this case, enter the target printer's IP address or host name manually.
NOTE
You can also manually set the printer's IP address or host name.
❑Confirm the settings ➞ click [OK] to close the [Add Port] dialog box.
7 Click [Close] to close the [Printer Ports] dialog box.
8 In the printer properties dialog box, click [Apply] to apply the settings.
9 Click [OK] to close the printer properties dialog box.
The port settings are configured.
2
Using Canon LPR2
Connecting to a Printer |