32
COMPUTER
1
3D
Choose COMPUTER 1(ANALOG PC) by pressing the
COMPUTER 1 button on the remote controller.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
1
Input Menu
2
3

Input Source Selection (COMPUTER 1: ANALOG PC)

Computer Input
COMPUTER 1 button
Note:
When the Auto input function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.53).
Remote Controller
Press the MENU button to display the On-Screen
Menu. Use the Point  buttons to select Input and
then press the Point or the OK button.
Use the Point  buttons to select COMPUTER 1.
When COMPUTER 1 is selected, press the Point to
access the submenu items. Use the Point  buttons
to select the ANALOG PC input source and then press
the OK button.
COMPUTER 1(ANALOG PC)
COMPUTER 1(SCART)
Direct Operation
Menu Operation