Connect Power Cord
Connect the Power Cord and Turn On the Machine
12
Ex.
1 0 0 % | A 4 |
| ||||
|
|
|
|
| T E X T / P H O T O | 1 |
|
|
|
|
| ||
|
|
|
|
|
|
|
Main power switch
Connect the power cord into the rear socket and the wall outlet, and press the [I] side of the main power switch to ON.
The machine enters the standby mode.
What if...
●<CLOSE COVER/PRINTER COVER> is displayed:
Make sure that the printer cover and scanning platform are closed properly. (See “Install Toner Cartridge,” on p. 5.)
●<TONER IS NOT SET/INSERT TONER> is displayed:
Make sure that the toner cartridge is installed properly. (See “Install Toner Cartridge,” on p. 5.)
●<LOAD PAPER> is displayed:
Make sure that paper is loaded in the machine. (See “Set Up the Paper Trays and Load Paper,” on p. 7.)
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.
NOTE
–During electrical storms, disconnect the power cord from the power outlet. (Please note that any documents stored in the machine’s memory will be deleted when you unplug the power cord.)
–Whenever you unplug the machine, wait at least five seconds before you plug it in again.
–Do not plug the machine into an uninterruptible power supply (UPS).
11 | 12 |