To Use the Machine as a Network Printer (Network Connection)
IMPORTANT
•The machine needs to be restarted for the specified settings to become effective. To restart the machine, disconnect the power cord, wait for at least 10 seconds, and connect the power cord again.
NOTE
•For details on specifying network settings, see Chapter 2,“Specifying the Network Settings,” in the Network Guide.
•For additional network protocol settings, see the Network Guide.
•For the values of the network settings, consult your network administrator or internet service provider (ISP).
Specifying Network Settings
1 Press [Menu] ➝ 
or 
to select <6.NETWORK SETTINGS> on the LCD ➝ press [Set].
2 Press 
or 
to select <1.LAN SETTINGS> ➝ press [Set].
3 Press 
or 
to select <1.IP ADDRESS AUTO.> ➝ press [Set].
●To obtain an IP address automatically (dynamic allocation):
4 Press 
or 
to select <ON> ➝ press [Set].
5Press 
or 
to select <1.DHCP>, <2.BOOTP>, or <3.RARP> ➝ press [Set].
6 | Press | or | to select <ON> ➝ press [Set]. |
7 | Press [Stop/Reset] to return to the standby display. | ||
8Restart the machine by disconnecting the power cord, and then reconnecting it.
●To specify an IP address manually (static allocation):
4Press 
or 
to select <OFF> ➝ press [Set].
5Press 
or 
to select <2.IP ADDRESS> ➝ press [Set].
6Enter an IP address of the machine using the numeric keys ➝ press [Set].
Write down the IP address you entered: _______ . _______ . _______ . _______
7 Press 
or 
to select <3.SUBNET MASK> ➝ press [Set].
8Enter the subnet mask using the numeric keys ➝ press [Set].
Write down the subnet mask you entered: _______ . _______ . _______ . _______
9 Press 
or 
to select <4.DEFAULT GATEWAY> ➝ press [Set].
10 Enter the default gateway address using the numeric keys ➝ press [Set].
Write down the gateway address you entered: _______ . _______ . _______ . _______
11Press [Stop/Reset] to return to the standby display.
12Restart the machine by disconnecting the power cord, and then reconnecting it.