Start Here
Easy Setup Instructions
Thank you for purchasing the Canon PIXMA MP780/750. To prepare your machine for use, please follow these Easy Setup Instructions before referring to any other documentation.
IMPORTANT
Do not connect the USB cable until after the software is installed. See the rear side of this sheet for details.
1Unpack and install the machine.
Check the package contents.
• Machine | • Power cord | • Telephone line |
| • Print head |
|
MP780 | MP750 |
|
• Ink tanks |
|
|
Black | Black | |
| Cyan |
|
| Magenta |
|
| Yellow |
|
• Easy Setup Instructions | • Quick Start Guide |
|
•Setup CD-ROM
The Setup
•In this sheet, illustrations of MP780 are shown.
•A printer cable is not included. You must purchase a USB cable (less than 16 3/8 ft.) to connect your machine to a computer.
2Connect the telephone line. (MP780 model only)
Connect the telephone line and any necessary external device.
For details, see the Quick Start Guide.
| Connect external devices as follows: | |||
|
| External device jack |
| |
|
| Telephone line jack |
| |
| Telephone or answering machine | |||
| Telephone |
| Telephone or | |
| Machine | answering machine | ||
| line |
|
| |
|
|
|
| |
Connect the telephone | ||||
|
|
|
| |
line cord to the wall jack. | Telephone |
| LINE TEL Telephone | |
| Machine | Computer | ||
You can connect an external | line |
| ||
|
|
| ||
device (telephone or answering machine) if necessary. |
|
|
|
|
3Connect the power cord.
1Connect the power cord.
1.Connect one end of the power cord to the rear of the machine.
2.Connect the other end to the AC outlet.
2If the message <PUT IN CARTRIDGE> appears, go to Step 4, "Install the print head."
4Install the print head.
6 Lower the lock lever.
Click
Lower the lock lever until you hear a click as it locks into place.
5Install the ink tanks.
1Prepare the ink tanks.
Remove the | Remove the protective cap |
protective film. If it is not | and discard it. |
removed completely, |
|
problems with printing |
|
may occur. |
|
| Do not touch! |
2Insert the ink tanks.
Click
Push it in until locks | Good example | Bad example: Tank 6BK is |
into place. |
| not fully inserted. |
|
| Make sure to press it down |
|
| firmly. |
3Close the Inner Covers and the Scanning Unit.
| Click |
Click | Pull the Scanning Unit Lever |
| towards you to close the |
Close the two Inner Covers. | Scanning Unit. |
| IMPORTANT |
| Be sure to hold the Scanning Unit firmly with one hand. |
6Load the paper.
1Open the Auto Sheet Feeder.
2Load two sheets or more of letter-size plain paper.
(1) Open the Auto Sheet | Load the paper with the print side face up. |
Feeder. | |
| Pinch and adjust |
| the paper guide |
| to the width of |
| the stack. |
(2) Pull out the Paper | Ensure the paper stack | |
Support until it stops. | ||
does not exceed the paper limit mark. | ||
|
7Align the print head from the Operation Panel.
Be sure to align the print head to ensure print quality.
1Press [OK] to start print head alignment.
(1) This message appears. | (2) Press [OK]. | (3) The machine will print | |
|
|
| the print head position |
ALIGN | PRINT HEAD |
| pattern and automatically |
PRESS | [OK] |
| align the print head. |
1Press the Open Button to open the Paper Output Tray. Then lift the Scanning Unit until it locks into place.
IMPORTANT
Be sure to hold the Scanning Unit firmly with one hand.
2Open the two Inner Covers.
(2)The Print Head Holder moves to the center.
(3) Install the print head here.
(1) Open the two
Inner Covers.
Press the Open Button. | Lift the Scanning |
| Unit. |
Click
Pull
the Scanning
Unit Lever.
3Raise the lock lever.
Touch only the lock lever!
Raise this securely.
If this message |
does not appear |
after closing the |
Scanning Unit, |
see "Aligning |
The Print Head |
Automatically" |
in the Quick Start |
Guide. |
If the printed pattern matches the illustration, print head alignment is complete.
You can change the language displayed on the LCD.
For details, see "Selecting The Language For The LCD" in the Quick Start Guide.
You have completed installation and alignment.
4 Prepare the print head. | 5 Insert the print head. |
(2) Push back.
Do not touch!
(1) Insert.
Remove the protective cap and discard it.
If you are connecting the machine to a computer for use, see the rear side of this sheet for instructions on installing the software.
© 2004 Canon U.S.A., Inc., Canon and BCI are registered trademarks and PIXMA is a trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.
xx2004A | © CANON INC. 2004 | PRINTED IN CHINA |