d)Examine the rear of the chip to ensure the LED has not been damaged or cut off.
LED
Missing
LED
undamaged cartridge chip | damaged cartridge chip |
e)Place the chip onto the corresponding coloured CISS cartridge, ensuring that the small plastic lugs are inserting into the chip holes. Use a soldering iron gently melt the plastic lugs to hold the chip in place.
f)Repeat stepsb) & e) for each of the cartridges on your CISS
Alternatively you can fit the cartridge chips using thin double sided tape although the preferred method is with a soldering iron.
If attaching the chip with double sided tape, please cut the tape and attach it to the rear of the chip as pictured below. DO NOT COVER ATTACHMENT HOLES OR LED.
LED
Attachment holes
Thin double sided tape
rear of cartridge chip pictured
9