8 Setup the Machine and the Computer
Install the Software
Windows
If the Found New Hardware or Found New Hardware Wizard screen appears:
1 Remove the USB cable connected to your computer.
The screen may close. In this case, proceed from .
2 Click Cancel to quit the screen.
3 Proceed from .
1 (A)
(B)
Press the ON button (A) to TURN OFF THE MACHINE.
•Operating noise continues for about
30 seconds until the machine turns off. Make sure that the POWER lamp (B) stops flashing.
2
Turn on the computer, then insert the Setup
The setup program should run automatically.
Windows Vista Go to Step .
Windows XP/ |
| Go to Step . |
| ||
2000 |
| |
|
|
•If the program does not start automatically,
A
C
E
G
I
J
15