4-12
SmartBase MPC200/imageCLASS MPC200
Chapter 4: Maintenance & Service
"CHECK PAPER SIZE"
Cause: The size of the paper in the multi-purpose tray and that specified in the paper size
setting are different.
Solution: Load the correct paper size of change the paper size setting. Then press the
Resume button.
"CHECK PRINTER" (##334~##336, ##343, ##345, ##346 and ##352)
Cause: The printer's internal unit has malfunctioned.
Solution: (1) Remove the jammed paper. (Check the paper end sensor is OFF.)
(2) Press Resume button.
(3)Reinstall the Cartridge.
(4) Turn the power off and on.
(5)Set the service data #1 SSSW SW01 bit 0 to "1" and check the service code.
Refer to the countermeasures for that error code.
"CLEAR PAPER JAM"
Cause: Paper jam.
Solution: Clear the paper jam and press the Resume button.
"COLOR INK LOW"
Cause: The ink level in the color ink tank is low.
Solutions: Replace the color ink tank.
"COVER OPEN"
Cause: You opened the inner cover during an operation.
Solution: Close the inner cover.
Cause: Failure of a cover sensor.
Solution: Replace the cover sensor. (as a SPCNT board itself: HG1-4474).
"LOAD PAPER"
Cause: The machine is out of paper.
Solution: Add more paper to the paper cassette. Make sure the stack is below the limit mark
and press the Start or Resume button.
"MEMORY FULL"
Cause: The machine’s memory is full because you tried to copy too many pages at once
or a very detailed document.
Solution: Divide the document and copy each part separately.
Cause: In photo print mode, the photograph data is too large to print from your machine.
Solution: Print the photograph from your computer.
"PUT IN CARTRIDGE"
Cause: The printhead is not set.
Solution: Set the Printhead.
Cause: The printhead is set incorrectly.
Solution: Set the printhead correctly.
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com