Chapter 2 Setting Up 2-15
Setting Up
4Raise the blue cartridge lock lever on
the cartridge holder.
5Remove the Colour BJ cartridge from
its package, then remove the orange
protective cap qand tape w.
•Discard the cap and tape. Never attempt
to reattach them to the BJ cartridge print
head.
•Install the BJ cartridge immediately after
removing the cap and tape.
6Insert the BJ cartridge into the cartridge
holder, then lower the blue cartridge lock
lever until it locks into position.
7Press on the two orange tabs and
remove the two orange pieces from the
BJ cartridge.