Chapter 6 Speed Dialling 6-5
Speed Dialling
Using One-Touch Speed Dialling
To use this feature, you must first register a number for one-touch speed dialling.
(1p. 6-3)
Follow this procedure to send documents using one-touch speed dialling:
1Open the document tray.
2Adjust the document feed lever for the
document you are loading. (1p. 4-2)
3Prepare the document and load it, face
down, in the ADF. (1p. 4-4)
• For colour sending, press Colour/B&W to (Currently used memory)
turn on its light. (1p. 7-2)
• To adjust the resolution and contrast,
1pp. 7-3, 7-4. (Standby to scan)
4Press the one-touch speed dialling button Ex:
assigned to the number you wish to fax.
• The number registered under that one-touch
speed dialling button is displayed.
• If you press the wrong button, press Stop,
then press the correct button.
•NO TEL # appears if no fax number is
assigned to the one-touch speed dialling
button you pressed.
5Press Start to begin scanning for sending,
or wait a few seconds for the MultiPASS to
begin scanning automatically.
• If you prefer the MultiPASS never to scan a
document automatically after a few seconds,
disable the TIME OUT setting. (1p. 14-6)
n• You can also use one-touch speed dialling to send a document to more than one
destination at a time. (1p. 7-13)
• To dial a telephone number registered for one-touch speed dialling, simply lift the
handset and press the one-touch speed dialling button.
TEL=905 795 1111
DOCUMENT READY
MEMORY USED 0%