Using the Wireless Controller

Point it at the camcorder’s remote sensor when you press the buttons.

Inserting the Battery

The wireless controller operates with a lithium button battery CR2025.

1. Pull out the battery holder.2. Place the lithium button battery with the + side facing up.3. Insert the battery holder.

The wireless controller may not work properly when the remote sensor is

subjected to strong light sources or direct sunlight.

If the wireless controller does not work, check if the remote sensor is set to [OFF] ( 74).

When the camcorder cannot be operated with the wireless controller, or when it can only be operated in very close range, replace the battery.

18