Canon PIXMA MX420 Step Five, Step Six, Adding Your Multifunction to Your Network, Previous, Next

Adding Your Multifunction to Your Network

<< Previous Next >>

Step Five

Select the access point name, then press the OK button.

NOTE: If you are living in an apartment, nearby access points in use may be detected.

Step Six

When one of the following screens is displayed, enter the network key using the Numeric buttons (E), then press the OK button.

If the following screen is not displayed, go to step 8

Press the button to switch character entry modes. Network key entry is case-sensitive.

Be sure to enter upper and lower case letters of the alphabet correctly

7