Adjusting the Flash Output

Available in the following modes.

In mode, the flash output can be controlled in three steps, starting from FULL, when shooting.

When the flash output is low, less shadow appears in the image. However, when shooting a wide scene or area, the image will likely be darker due to insufficient light. When adjusting the flash output, consider all the shooting conditions, including the distance to the subject.

1Press the button.

2Select (Flash Output) using the up or down button.3Adjust the flash output using the left or right button.

You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.

4Press the button.

5Shoot the image.

Shooting

111