Taking Pictures (Smart Auto)

•What if white and gray frames appear when you point the camera toward a subject?

A white frame appears on the face or subject that the camera detected as the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range.

If the subject moves, however, the gray frames will disappear, leaving only the white frame.

•What if a frame does not appear on the subject you want to shoot?

The subject may not be detected, and frames may appear on the background. If this happens, try shooting in Gmode (see Camera User Guide).

•What if a blue frame appears when you press the shutter button halfway? A blue frame appears when a moving subject is detected; the focus and exposure will continuously adjust (Servo AF).

•What if a flashing appears?

Attach the camera to a tripod so that the camera does not move and blur the image.

•What if the camera does not play any sounds?

You may have been pressing the lbutton while turning on the camera, which will turn off all sounds. To turn the sounds on, press the nbutton to choose [Mute] in the 3tab, then press the qrbuttons to choose [Off].

•What if the image comes out dark even if the flash fired when shooting?

The subject is too far away for the flash to reach. The effective flash range is approximately 50 cm – 7.0 m (1.6 – 23 ft.) at maximum wide angle (j), and approximately 1.4 – 3.0 m (4.6 – 9.8 ft.) at maximum telephoto (i).

•What if the camera beeps once when the shutter button is pressed halfway?

Your subject may be too close. Move about 1.4 m (4.6 ft.) or more away when the camera is at maximum telephoto (i).

•What if the lamp lights when the shutter button is pressed halfway?

To reduce red-eye and to assist in focusing, the lamp may light when shooting in low light conditions.

•What if the hicon blinks when you try to shoot?

The flash is charging. You can shoot when recharging ends.

What if an icon appears on the screen?

The icon for the determined scene, and the IS mode icon will appear on the screen. For details on the icons that appear, see “Scene Icons” (see Camera User Guide) and “IS Mode Icons” (see Camera User Guide).

22