Canon PRO 150+ Super Savings, Easy To Use, A Valuable Investment, Specifications, Punch Tools

imageRUNNER Marking Engine

imageRUNNER

PC running ImageSmartSystem Controller

Document Mastering* imageSCANNER 65*

Paper Supply	Inserter*
Module**
*Optional Accessories
**Optional for the imageRUNNER 110; Standard for the imageRUNNER Pro 150+

Booklet-maker*

Puncher* Finisher

Stacker(s)* with

Removable Dolly

NOTE: Cannot configure the imageRUNNER device with both the Booklet-maker and the in-line Perfect Binder.

Perfect Binder*

Super Savings

The superior speed of the in-line Puncher significantly reduces job turnaround time for hole-punched jobs. Factor in the cost of ordering and stocking pre-punched media, the labor required for off-line punching, and the potential for error and document damage associated with manual job collation, and the benefit to your operation is even greater.

Easy To Use

As a fully integrated accessory, the in-line Puncher offers unparalleled convenience. All punching features are directly selectable from the machine’s operator-controlled interface; no separate programming is required. Puncher tools for different hole patterns are operator-interchange- able, and a variety of paper types is supported. There is also full page-level jam recovery on the device to guaran- tee the set and sheet integrity of your jobs.

A Valuable Investment

Adding the in-line Puncher to your Networked Production System will give you unmatched flexibility in produc- ing ready-to-bind output with minimal time, cost, and operator-involvement.

Canon is a registered trademark, and IMAGERUNNER, Canon Know How, and the GENUINE logo are trademarks of Canon Inc. IMAGEANYWARE is a service mark of Canon U.S.A., Inc. All other terms and product names may be trademarks or registered trademarks of their respective owners, and are hereby acknowledged.

Specifications subject to change without notice.

0033W257

0802-PU-7.5M

PRINTED ON RECYCLED

PAPER IN THE U.S.A.

Specifications

Power Requirements:	120 VAC, 60Hz, 2.5A
	100 VAC, 50/60Hz, 2.5A
	200/230/240 VAC, 50Hz, 1.4A
Power Consumption:	320 VA

Dimensions (H x W x D): 49.6" x 40.2" x 31.9" (126cm x 102cm x 81cm)

Weight: 595 lb. (270kg)

Punch Tools:

•Loose-leaf/Office Hole Punch Tool –2-hole

–3-hole (Diameter 0.313") –4-hole (Diameter 0.276")

•Plastic Comb Punch Tool (Rectangular)■

–Rectangular Holes (0.315" x 0.126")

• Wire Comb Punch Tool 2-1 Pitch (Round)■

–Round Holes (Diameter 0.236")

• Wire Comb Punch Tool 3-1 Pitch (Round)■

–Round Holes (Diameter 0.157")

•Wire Comb Punch Tool 2-1 Pitch (Rectangular)■ –Rectangular Holes (0.256" x 0.217")

•Wire Comb Punch Tool 3-1 Pitch (Square)■

–Square Holes (0.157" x 0.157")

Punch Tool Durability: 12 - 15 Million Actuations

NOTE: You may order customized Punch Tools to meet your specifications. Please contact your Canon- authorized Dealer for more information.

▲The Puncher is interchangeable between the imageRUNNER 110 and the imageRUNNER Pro 150+. ■ Please check with your local Canon-authorized Dealer for availability.

1-800-OK-CANON www.usa.canon.com

Canon U.S.A., Inc.

One Canon Plaza

Lake Success, NY 11042