Using the Self-Timer

1.Press the / button (a) and use the W or X button to cycle through self-timer settings (b).

•When the shutter button is pressed fully, the self-timer lamp will blink (when setting the red-eye reduction function, the self-timer lamp will blink and then stay lit for the last 2 seconds).

To cancel the self-timer, press / button to display .

10 sec. delay: The shutter releases 10 seconds after the shutter button is pressed.

• 2 sec. before the shutter releases, the self-timer sound beeps*1 quickly and the lamp will speed up.

2 sec. delay: The shutter releases 2 seconds after the shutter button is pressed.

•The self-timer sound beeps*1 quickly when the shutter button is pressed and the shutter will release 2 seconds later.

Custom Timer: You can change the delay time (0 – 10*2, 15, 20, 30 sec.) and number of shots (1 – 10*3) (p. 19).

• When a delay time of over 2 seconds is set for the [Delay] option, the self-timer sound beeps quickly 2 seconds before the shutter releases. If multiple shots have been specified for the [Shots] option, the sound will play for the first shot only.

*1 May differ depending on My Camera settings (Advanced Guide p. 141). *2 Default setting.

*3 Default setting is 3 shots.

This setting cannot be set in some shooting modes.

See the Advanced Guide: Functions Available in Each Shooting Mode (p. 199).

ÎSee Selecting a Shooting Mode (p. 11).

18