Changing Shooting Functions

Turning off the AF Assist Beam

If the camera cannot focus in low light conditions when you press the shutter button halfway, the lamp will automatically light to assist focusing. You can turn off the lamp.

●Select [AF-assist Beam], then press the qr buttons to select [Off].

Changing the Image Display Time

You can change the length of time the images display directly after shooting.

●Select [Review], then press the qr buttons to select an option.

●If you select [Off], the image will not display.

●If you select [Hold], the image displays until you press the shutter button halfway.

Changing the Image Display Right After Shooting

You can change the image display that appears after shooting.

●Select [Review Info], then press the qr buttons to select an option.

Detailed Displays detailed information (p. 45).

 

The area inside the AF frame is

Focus

magnified, allowing you to check the

Check

focus. The procedure is the same as

 

in “Checking the Focus” (p. 103).

131