Trimming
You can cut out a portion of a recorded image and save it as a new image file.
Trimming Area
Trimming Area Display
Recorded pixels after trimming
Choose [Trimming].
●Press the nbutton, choose the 1 tab and [Trimming], then press the m button.
Choose an image.
●Press the qrbuttons or turn the Âdial to choose the image and press the m button.
Adjust the trimming area.
XA frame will appear around the portion of the image to be trimmed.
XThe original image will display in the upper left and the trimmed image will display in the lower right.
●If you move the zoom lever to the left or right, you can change the frame size.
●If you press the opqr buttons, you can move the frame.
●If you press the l button, you can change the frame size.
●In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be
used for trimming. You can switch between frames by turning the Âdial.
●After pressing the m button, press the qr buttons or turn the  dial to choose [OK], then press the m button again.
Save as a new image and display.
●Perform Steps 4 and 5 on p. 132.
133