Returning to a Pre-marked Position

If you wish to return to a particular scene later, mark the point with the zero set memory, and the tape will

stop at that point when you rewind/fast forward the tape.E This function is operated with the wireless controller.

REW button

ZERO SET MEMORY STOP button button

1.During playback, press the ZERO SET MEMORY button at the point you wish to return to later.

The tape counter is reset to 0:00:00 and the mark appears.

To cancel, press the ZERO SET MEMORY button again.

2.After you finish playing back the tape, stop and rewind it.

If the tape counter shows a negative value, fast forward the tape instead.

The tape stops automatically at “0:00:00” and the mark disappears.

The tape counter changes to time code.

The zero set memory may not function correctly if the time code has not been recorded consecutively.

The zero set memory function may not work correctly if you mix recordings in HDV and DV

standards on the same tape.

Playback

101