11-10 Connecting to the Network

Connecting network cable to the ColorPASS

In this section, the back panel of the ColorPASS is illustrated, followed by information for connecting to the Ethernet board. For information about connecting to a Token Ring network, see Appendix A, “Token Ring Network Option.”

Shut down the ColorPASS before attaching it to any network device. If the ColorPASS

!has just finished processing, wait 5 seconds after the system reaches the Idle state before using the power switch to turn off the ColorPASS.

Back view of the ColorPASS

10/100BaseT Ethernet (RJ-45)

Copier interface connector