Cardo S-2TM TURNING YOUR HEADPHONES ON AND OFF, PAIRING YOUR HEADPHONES

S-2™ Stereo Headphones

S-2 Stereo Headphones

TURNING YOUR HEADPHONES ON AND OFF

Turning On the Headphones

Press and hold the CTRL Button for 4 seconds until you hear a short

beep. The LED status indicator will then ash blue.

If this is your rst time using the headphones, please refer to the

“Pairing Your Headphones” section below.

NOTE: Tap the CTRL Button each time you turn on the

headphones to reconnect the headphones to your mobile phone.

Turning Off the Headphones

Press and hold the CTRL Button for approximately 3 seconds until

you hear a long beep. The LED status indicator will ash red once and

then stop ashing.

The headphones only work with Bluetooth®-enabled mobile

phones, stereo Bluetooth® music players, and/or stereo Bluetooth®

adapters.

Prior to using and pairing your headphones for the rst time, you

must pair them with a Bluetooth®-enabled mobile phone, stereo