Controls

 

Operating sequence

 

Cooling — When the system thermostat calls for cooling, 24

 

V is supplied to the “Y” and “G” terminals of the thermostat.

 

This completes the circuit to the contactor coil (C) and

 

indoor (evaporator) fan time delay relay (TDR). The

 

normally open contacts of C close and complete the circuit

 

to compressor motor (COMP) and to outdoor (condenser)

 

fan motor (OFM). Both motors start instantly. The IFM starts

 

according to the selection pin set-up on the Easy Select™

50XP

Board.

On the loss of the thermostat call for cooling, 24 v is

 

removed from both the “Y” and “G” terminals (provided the fan switch is in the “AUTO” position) deenergizing the compressor contactor and opening the contacts supplying power to compressor/OFM. After preselected delay, the IFM shuts off. If the thermostat fan selector switch is in the “ON” position, the IFM will run continuously at speed selected on Easy Select™ Board.

Heating — If accessory electric heaters are installed, on a call for heat, circuit R-W is made through the thermostat contacts. Circuit R-G is made which energizes the IFM. If the heaters are staged, then the thermostat closes a second set of contacts (W2) when second stage is required. When thermostat is satisfied, contacts open, deenergizing the heater relay. After a preselected delay, the IFM shuts off. If the thermostat fan selector switch is in the “ON” position, the IFM will run continuously at speed selected on Easy Select™ Board.

NOTE: On units with a Time Guard® II device: once the compressor has started and then stopped, it cannot be restarted again until 5 minutes have elapsed.

The indoor blower operation with a call for fan operation (G) in cooling mode will perform by the on/off delay profile selected at start up on the Easy Select™ Board.

22

Page 22
Image 22
Carrier 13 50XP manual Controls, Operating sequence

13 50XP specifications

The Carrier 13 50XP is a central air conditioning unit known for its reliability, efficiency, and advanced technology features. Designed for residential and light commercial applications, this system stands out in the HVAC market for its performance and durability.

One of the primary features of the Carrier 13 50XP is its high energy efficiency. The unit has a SEER (Seasonal Energy Efficiency Ratio) rating of up to 14, making it a cost-effective option for homeowners looking to reduce energy consumption. This efficiency is crucial as it translates to lower utility bills and a reduced carbon footprint.

The Carrier 13 50XP incorporates the innovative WeatherShield cabinet, which enhances durability against the elements. This robust housing protects internal components from harsh weather conditions, ensuring reliable performance over time. The all-aluminum coil design further enhances its resistance to corrosion while maximizing heat exchange efficiency.

In terms of comfort control, the system is compatible with various thermostat options, including smart thermostats, providing homeowners with the convenience of monitoring and adjusting temperatures from anywhere. The multi-speed blower provides an added layer of comfort by optimizing humidity control and air distribution throughout the space.

The unit is equipped with sound-dampening technology, which minimizes operational noise, making it a quiet choice for residential areas. This feature is essential for maintaining a peaceful home environment, particularly in bedrooms or family rooms.

Additionally, the Carrier 13 50XP utilizes R-410A refrigerant, which is designed to be environmentally friendly. R-410A is less harmful to the ozone layer than older refrigerants, complying with current environmental regulations and contributing to sustainable living practices.

The installation process for the Carrier 13 50XP is straightforward, thanks to its compact design and flexible configurations. The unit is also backed by Carrier's reliable warranty options, providing peace of mind for consumers.

In summary, the Carrier 13 50XP is a well-rounded air conditioning solution that combines energy efficiency, durability, and advanced technology features. Its commitment to environmental responsibility and user comfort makes it a valuable addition to any home or small commercial setting, ensuring reliable cooling performance for years to come.