INSTALLATION

Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties.

SAFETY PRECAUTIONS

For the safety of the installer, vehicle operator, passengers and the community please observe the following safety precautions. Failure to follow all safety precautions and instructions may result in property damage, injury or death.

Qualifications - The installer must have a firm knowledge of basic electricity, vehicle electrical systems and emergency equipment.

Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines)

Mounting - Mount the unit for easy access by the vehicle operator. DO NOT mount in air bag deployment area. Assure clearances before drilling in vehicle. To prevent internal damage mounting bolts must not enter case more than 1/4".

Wiring - Use wiring capable of handling the current required. Make sure all connections are tight. Route wiring to prevent wear, overheating and interference with air bag deployment. Install and check all wiring before connection to vehicle battery.

Testing - Test all siren functions after installation to assure proper operation. Test vehicle operation to assure no damage to vehicle.

Keep These Instructions - Keep these instructions in the vehicle or other safe place for future reference. Advise the vehicle operator of the location.

MOUNTING

The mounting bracket supplied can be installed above or below the unit. Choose a mounting location convenient to the operator and away from any air bag deployment areas. Inspect behind mounting area for clearance. Assure adequate ventilation to prevent overheating. Consider wire routing and access to connections, as well as microphone bracket placement. Install mounting bracket to vehicle using 1/4" hardware (not supplied).

If mounting in a rack or console, make sure that mounting bolts do not enter case more than 1/4".

A microphone clip along with mounting screws (CP3633) holds the microphone in place.

CP3571 Mounting Bracket

1/4-20 Bolt (CP3966)

Bolt must not pass through cover more than 1/4”

TB0349A

Page 3 of 12

09/22/05

Page 3
Image 3
Carson LCS-7-01 manual Installation, Safety Precautions, Mounting

LCS-7-01 specifications

Carson LCS-7-01 is a notable entry in the U.S. Navy's Littoral Combat Ship (LCS) program, designed to enhance maritime security and facilitate a range of naval operations. Commissioned in 2020, LCS-7-01 showcases advanced technologies and features that underscore its role in modern naval warfare.

One of the primary characteristics of LCS-7-01 is its modular design, allowing for rapid reconfiguration of mission capabilities. This enables the ship to operate effectively across diverse maritime environments, whether in anti-submarine warfare, mine countermeasures, or surface warfare. The ship’s versatility is paramount in addressing emerging threats and responding to evolving maritime challenges.

The vessel is powered by an innovative combination of diesel engines and gas turbines, delivering a top speed exceeding 40 knots. This impressive speed ensures quick maneuverability, allowing it to swiftly engage in missions and conduct high-speed operations. LCS-7-01 is equipped with a shallow draft, enabling access to coastal areas and shallow waters that larger vessels cannot navigate.

One of the standout features of the Carson LCS-7-01 is its sea frames, which integrate advanced technologies to enhance situational awareness and operational effectiveness. The ship utilizes an advanced combat management system that incorporates Automated Information Systems (AIS), radar, and sensors to provide a comprehensive real-time view of the operational environment. This capability is indispensable for coordinating multi-domain responses to threats.

LCS-7-01 also boasts a flight deck capable of supporting various helicopter and unmanned aerial vehicle (UAV) operations. The ability to deploy and recover aircraft enhances the ship's surveillance and reconnaissance capabilities, crucial for successful mission execution. The hangar can accommodate several UAVs and support their maintenance, enabling extended operational capabilities.

In addition to its technical specifications, LCS-7-01 emphasizes crew comfort and efficiency. The ship is designed for a smaller crew, which promotes operational efficiency while ensuring crew members can live and work comfortably at sea for extended periods.

In summary, Carson LCS-7-01 is a cutting-edge naval platform characterized by its modular design, high speed, advanced sensors, and operational flexibility. Its capabilities are vital in addressing the complexities of modern maritime operations, ensuring the U.S. Navy remains prepared to respond effectively to diverse threats across littoral regions. With its advanced technologies and versatile mission profile, LCS-7-01 stands as a significant asset in the Navy's fleet.