Cary Audio Design CAD-280SA Hazard Presents Personal Injury or Death, Specifications

Models: CAD-280SA

1 8
Download 8 pages 2.65 Kb
Page 2
Image 2

Specifications for your newV-12Rpower amplifier.

We have updated the V-12 mono and stereo models to a RACING (R) version! The new racing input circuit makes the input sensitivity 1.2 volts, similar to most components currently available. Operating the power amplifier is a simple procedure. Each unit is designed for long term stability in virtually any home operating situation. Please note, if the unit is operated outside the parameters outlined in this owner's manual, damage may result. Please read this manual carefully before putting your new V-12R in operation. The following definitions are applicable. Warnings should be followed explicitly.

WARNING

HAZARD PRESENTS PERSONAL INJURY OR DEATH

Caution

EQUIPMENT DAMAGE MAY OCCUR BUT NOT PERSONAL INJURY

Note

Proper performance of the amplifier cannot be ensured

if disregarded

1.2 Specifications

The CAD-280 SA V-12R or V-12R Monobloc version basic specifications:

DIMENSIONS:

9’’H x 12 _’’W x 20’’D

 

WEIGHT:

68-lb. stereo or 85-lb. for the Monobloc version

CIRCUIT TYPE:

Push-Pull Triode or Ultra-linear Amplification in Pure Class A

POWER OUTPUT:

50 watts – Triode Mode

100 watts – Triode (Mono)

 

100 watts – Ultralinear Mode

200 watts – Ultralinear (Mono)

INPUT SENSITIVITY:

1.3 volts for full output

 

INPUT IMPEDANCE:

150,000 ohms

 

NOISE AND HUM:

> 84db below rated output

 

FREQUENCY RESPONSE:

20Hz to 23Khz +/- 1.0 dB (at full power)

TUBES:

2- 12BZ7 Input tubes (or 12AY7, 12AX7)

 

2- EL-84 Current Source tubes (or 6BQ5)

90, 6L6)

12- EL-34 Output tubes (or 6550, KT-66, KT-77, KT-88, KT-

 

 

POWER TRANSFORMER:

1- EI laminated, 200% duty cycle

 

OUTPUT TRANSFORMERS:

2-EI laminated stereo (1-EI mono) Silicon Impregnated

RESISTORS:

1.0% tolerance, precision metal film resistors

CAPACITORS:

Oil Filled

 

POWER SUPPLY CAPACITORS:

4 - 560 MFD @ 400 volts

 

AC CORD:

3 conductor shielded detachable

 

AC POWER REQUIREMENTS:

117/234 volts AC 50/60Hz

 

POWER CONSUMPTION:

420 watts in operation, 10 watts in stand-by

WARM-UP TIME:

3 minutes

 

BREAK-IN PERIOD:

100 hours of music playing time

 

FINISH:

Jaguar Carnival Red paint on chassis

FRONT PANEL:

Machined, Black Anodized aluminum

Specifications are subject to improvement without notice or obligation.

Page 2
Image 2
Cary Audio Design CAD-280SA operation manual Hazard Presents Personal Injury or Death, Specifications