Triode/Ultra-Linear Switch

illuminated. Should you not observe the above conditions, turn off the amplifier and check the power cord and AC socket.

On the top of the chassis behind the KT-88 output tubes is located a chrome handle switch. With the handle pushed to the rear of the amplifier the mode of operation is ultra-linear. In the forward position the mode will be in triode class A mode. This set of switches maybe switched during listening. A slight click maybe heard in the loudspeakers. This is normal. Usually the triode position will provide plenty of power and is the most preferred position by most audiophiles and the designer of the Rocket 88 R.

Bias Setting

Your new Rocket 88 R bias adjustment has been factory set prior to shipping. Please keep in mind that the bias will vary from location to location depending on the AC line voltage. The design of the Rocket 88 R is such that you may start listening with the

factory set level. DO NOT TURN THE BIAS ADJUSTMENT SCREW WITHOUT WATCHING LEVELS ON A DC mA CURRENT METER! The type of meter used must

be a DC current meter or a volt ohm meter with a DC milliampere current scale. A digital multi-meter is very inexpensive and available at a local Radio Shack or ACE hardware store.

Included with your shipment of the Rocket 88 R is a black and orange patch cord with a _” male plug and two clips. This is the bias adjustment cable. To check and/or set the bias simply place the red clip lead on the positive meter lead. The black clip lead will hook up to the black negative lead of the test meter. The meter must be placed in the DC current mode. If the meter has a selectable scale use the one that measures 0 to 300 ma DC current. With the Rocket 88 R turned on and operating for about 10 minutes you will have the resting current level indicated. This measurement should be done without any music playing. A nominal level of 200 milliampere (mA) is standard for the Rocket 88 R. If the level is lower, advance the bias adjustment to the clockwise direction. Higher readings, turn the bias control to the left, counterclockwise direction. After you have established a 200 mA reading simply pull out the plug from the bias jack. You may hear a slight click in the speaker. This is normal.

Bias levels will change with time of day and power usage in your home. In fact during the summer months when the air conditioner is running you may have less AC line voltage available and in turn the bias will be slightly lower. This is not critical. In fact the Rocket 88 R is designed to operate in the range of 180 to as high as 240 mA DC current. The best sound will generally be produced in the 195 to 225 mA region. You may wish to

experiment if you desire. NEVER ADJUST THE BIAS SETTING WITH A VOLTMETER

SET TO THE VOLTAGE POSITION!

CAD 808, Rocket 88 R specifications

Cary Audio Design has long been known for its high-end audio components, and the Rocket 88 R and CAD 808 amplifiers exemplify the brand’s commitment to excellence in audio performance. The Rocket 88 R is a tube amplifier that combines classic design with modern technologies, making it a popular choice among audiophiles who appreciate the warmth and character of tube sound. The CAD 808, on the other hand, is a solid-state powerhouse that brings to the table unparalleled clarity and power, providing a perfect counterpart to its tube-based sibling.

The Rocket 88 R is built around a unique dual mono configuration that allows each channel to operate independently, minimizing crosstalk and enhancing stereo imaging. This amp utilizes a pair of 6550 power tubes, delivering an impressive output of up to 100 watts per channel in push-pull mode. The result is a rich, harmonic sound that brings music to life, allowing listeners to experience their favorite tracks with an emotional depth that only tubes can offer. Additionally, the Rocket 88 R features Cary Audio’s proprietary Ultra-Linear and Triode switching modes, providing audiophiles with the flexibility to choose between a more powerful, dynamic sound or the intimate, lush qualities of triode operation.

The CAD 808 amplifies the experience even further with its advanced solid-state design. Featuring robust power supply and output stages, the CAD 808 is capable of delivering a staggering 200 watts per channel, ensuring that it can drive even the most demanding speakers with ease. Incorporating state-of-the-art technologies such as high-current output transistors and a fully discreet output stage, the CAD 808 minimizes distortion and maximizes input sensitivity, resulting in crystal-clear audio reproduction. Its low negative feedback design not only enhances the overall sound quality but also improves the amplifier's transient response, providing listeners with a more dynamic and engaging listening experience.

Both amplifiers boast beautifully crafted chassis with a blend of classic aesthetics and modern functionality. The Rocket 88 R is complemented by its glowing tubes and polished finishes, while the CAD 808 showcases a sleek, contemporary look with a user-friendly interface.

In conclusion, the Cary Audio Design Rocket 88 R and CAD 808 amplifiers stand out as exceptional choices for audio enthusiasts seeking both tube warmth and solid-state clarity. With their unique technologies and remarkable design characteristics, these amplifiers promise to elevate any audio system, ensuring an unforgettable listening experience.

Cary Audio Design Rocket 88 R, CAD 808 specifications Triode/Ultra-Linear Switch, Bias Setting

Models: CAD 808 Rocket 88 R