Cary Audio Design CD 306 Specifications, Hazard Presents Personal Injury Or Death, if disregarded

SPECIFICATIONS

Operating the CD-306/200 CD Transport/Processor is a simple procedure, since each unit is designed for long term stability in virtually any home operating situation. However, if the unit is operated outside the parameters outlined in this owner’s manual, damage may result. Please read this manual carefully before putting your new Cary Audio Design CD-306/200 in operation. The following definitions are applicable to this manual. Please follow these definitions carefully.

WARNING

HAZARD PRESENTS PERSONAL INJURY OR DEATH

Caution

EQUIPMENT DAMAGE MAY OCCUR BUT NOT PERSONAL INJURY

Note

Proper performance of the CD PLAYER cannot be ensured

if disregarded

1.1 Specifications

The following section describes the CD-306/200 CD Transport/Processor basic specifications. Specifications are subject to change without notice or obligation.

CD Mechanism	Philips CDM12
Master Clock Jitter	Below measurable levels
Digital Filter	Pacific Microsonics PMD-200 with HDCD decoding
Digital / Analog Converters	(8) Burr Brown PCM1704u
Analog Filter	3rd Order Bessel
Analog Outputs	Balanced XLR , Single – Ended RCA
Digital Outputs	AES/EBU, Coaxial, Toslink
Digital Input	AES/EBU, Coaxial, Toslink
Digital Input Sample Rate	32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz
	Accepts 16, 20 or 24 bits

Frequency Range …………………………………… 2 Hz - 80 kHz (192kHz)

Amplitude Linearity………………………………… 0.1 dB (20Hz - 20kHz)

Phase Linearity……………………………………… 3°(20 Hz - 20 kHz)

Dynamic Range………………………………………120dB (1kHz)

Signal-to-Noise Ratio………………………………...122dB (1kHz)

Channel Separation…………………………………. 109dB (1kHz)

Total Harmonic Distortion……………………………0.0008% (1kHz)

Audio Output Level…………………………………..Single-Ended 3.0Vrms

	Balanced XLR 6.0Vrms
Power Input	Reconfigured at factory
	100-120/200-240 Vac, 50-60 Hz
Power Consumption	35 Watts
	P.2