IMPORTANT SAFETY INSTRUCTIONS

14.LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

15.POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17.OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

18.SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20.SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21.WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

22.HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units (including amplifiers) that produce heat.

23.IMPORTANT SAFETY NOTE: Before connecting a new component to your audio or home theater system it is always good practice to make certain that all components are turned off, and preferably unplugged from their AC power source. Many modern electronics products feature automatic turn-on circuits that may be activated during an installation, causing the potential for damage to electronic components and/or speakers. Such damage is not covered by product warranties and Cary Audio specifically disclaims responsibility for any such damage.

Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in your system.

AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not come on, contact your authorized service representative.

Wiring: Cables that run inside of walls should have the appropriate markings to indicate compliance with, and listing by the UL, CSA or other standards required by the UL, CSA, NEC or your local building code. Questions about cables inside of walls should be referred to a qualified custom installer, or a licensed electrician or low-voltage contractor.

Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your warranty. If water or any metal object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source immediately and contact Cary Audio for further instructions.

24.RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

25.NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

3

Page 3 Page 5
Page 4
Image 4
Cary Audio Design Xciter owner manual Important Safety Instructions
Page 3 Page 5

Xciter specifications

Cary Audio Design has long been synonymous with high-quality audio equipment, and their latest offering, the Xciter, is no exception. This advanced audio amplifier brilliantly combines cutting-edge technology with timeless design, making it a standout in any audiophile's setup.

One of the most notable features of the Xciter is its hybrid design, incorporating both solid-state and tube technology. This unique combination allows the amplifier to deliver a warm, rich sound characteristic of tube amplifiers while benefiting from the speed and precision of solid-state components. This synergy results in an audio experience that is both immersive and nuanced, perfect for critical listening sessions or casual enjoyment.

The Xciter boasts an impressive power output, capable of driving a wide range of speakers with ease. With an output of 125 watts per channel into 8 ohms, and even more at lower impedances, the Xciter can handle demanding music genres and maintain clarity without distortion. Cary Audio has also ensured that the amplifier provides ample headroom, allowing listeners to enjoy musical peaks without compromising fidelity.

Another key aspect of the Xciter is its advanced circuitry. The amplifier features a fully balanced design, which minimizes noise and increases detail in the audio signal. Additionally, Cary Audio has implemented high-quality components and meticulous circuit layout, ensuring that every note is rendered with precision and authenticity. The power supply is robust, providing stable energy to the amplifier for optimal performance.

User convenience is also a priority with the Xciter. The amplifier is equipped with a smart, intuitive control interface, allowing users to switch between various input sources seamlessly. Additionally, it features remote control access for easy adjustments from the listening position, enhancing the overall user experience.

Cary Audio Design has not overlooked aesthetics either. The Xciter showcases a sleek, modern design with a beautiful brushed aluminum finish and warm LED illumination. It is a piece of art that complements any decor while signifying the quality and sophistication of the audio equipment within.

In conclusion, the Cary Audio Design Xciter is a remarkable achievement in the world of audio amplification. With its hybrid technology, powerful output, advanced circuitry, user-friendly features, and stunning aesthetics, it stands as a testament to Cary Audio’s dedication to enhancing the listening experience. Audiophiles looking for a versatile and high-performing amplifier will find the Xciter to be a worthy addition to their audio arsenal.
Top Page Image Contents