Casablanca Fan Company 59062, 59060 operation manual Preparation

Models: 59062 59060

1 21

Page 6

Note: Some fans will have a shipping ring instead of shipping blocks. Please remove the ring and discard the screws.

1.888.227.2178

Image 6

Contents

Table of Contents What to Expect with Your Installation Tools Needed To hang the fan from a flat ceiling Standard Mounting AngledSupport Structure Standard Ceiling Mounting To hang the fan from aCeiling Bracket Make sure all four bumpers are Still attachedFor angled ceilings, point Opening toward peak Preparation Remove the shipping blocks from Motor. Discard the screwsCeilings or DownrodFor angled HigherFrom the top Tighten the setscrewLeave at least 8 extending DownrodDownrod ball into the slot Flush against the motor housing Through the canopy. LetAlign the screw holes on the adapter Cover with the screw holes on FanWiring Assembly as shownUsing an orange wire connector from Or commonWall Control BeforeAfter Canopy HolesBlades Attached, insert the blade iron intoFeed the wires from the bottom Light KitTuck the wires into the light kit, then lift Fan to the white wire from the light kitFound Hardware bag Finial Finial CapBattery Holder Door OperationReverse Button Fan Speed Low HighMaintenance & Cleaning OFFTroubleshooting Fan doesn’t work