Light Kit (continued)
www.CasablancaFanCo.com
1.888.227.2178
Bulb |
Clip |
Tab |
Notch |
To install the halogen bulb, angle | To install the bulb shield, raise |
one end of the bulb into the | the bulb shield to the light kit |
socket as shown, then push the | assembly and push the clips |
other socket inward and lift the | onto the sockets. |
bulb up until it fits into place. |
|
Align the the notches in the
globe assembly with the tabs in the light kit fitter. Carefully lift the globe assembly as far as it will go, then rotate it counter- clockwise until it is held into
place by the three tabs.
See next page for fan operation instructions.
When installing a halogen bulb, carefully cut off the end of the plastic sleeve packaging and hold the bulb by the plastic sleeve to screw it into the socket.
|
|
| Note: In compliance with US federal energy regulations, this ceiling |
|
|
| fan contains a device that restricts its light output. Exceeding the |
|
|
| wattage limit marked on the MAX wattage sticker affixed to the |
| 15 |
| light socket(s) may result in fire hazard or improper operation. |
|
|
|
|
