Setup Time And Date, OPERATING 140CR

Setup and Programming Steps

Cash Register Support

011-314 8888

SETUP

1.Turn PGM key to PGM mode

2.Plug in Cash Register into wall socket

3.Open the printer lit and insert batteries under the paper roll a. Batteries are not supplied with Cash Register

4.Feed the paper in to do printer and close the lit

1.When the display shows blinking “ 0 “ enter the data – Day – Month – Year

2.e.g 070101

3.After above step it will go over to Time mode

4.Type in the time e.g. 1300

5.This is a 24 hours system mode

6.Now Date & Time is set

NB: By pressing AC/C key, this procedure returns one by one

1.Turn mode switch to REG

2.Type in the amount of the sold item and press the department button 1-5

3.If you are done with the sale press subtotal and then total will be on screen.

4.Type in the amount that the customer gives you and press cash.

5.This will finalize your transaction.