Casio 2271 manual

Module No. 2271	2271-1

GETTING ACQUAINTED

Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to carefully read this manual and keep it on hand for later reference when necessary.

Applications

The built-in sensors of this watch measure direction, altitude, barometric pressure, and temperature. Measured values are then shown on the display. Such features make this watch useful when hiking, mountain climbing, or when engaging in other such outdoor activities.

Warning!

•The measurement functions built into this watch are not intended for taking measurements that require professional or industrial precision. Values produced by this watch should be considered as reasonable representations only.

•When engaging in mountain climbing or other activities in which losing your way can create a dangerous or life-threatening situation, always be sure to use a second compass to confirm direction readings.

•CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any claims by third parties that may arise through the use of this watch.

GENERAL GUIDE

•If the digital display of your watch is continuously changing, see “Auto Display Function” for information on how to stop it.

•The illustration below shows which buttons you need to press to navigate between modes.

Recall Mode

	Press D.
	▲
D	▲
	Timekeeping Mode
▲
Alarm Mode
	▲
D
▲	▲ ▲
▲
Stopwatch Mode
	D

TIMEKEEPING

	PM indicator	Use the Timekeeping Mode to set and view
	PM indicator	Seconds the current time and date.
		Seconds the current time and date.
	Day of week

About This Manual

•Button operations are indicated using the letters shown in the illustration.

• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “REFERENCE” section.

(Light)

•In any mode, hold down D for about one second to return to the Timekeeping Mode.

•You can use buttons B, C, and E to directly enter a sensor mode from the Timekeeping Mode or from another sensor mode. To get to a sensor mode from the Recall, Alarm, or Stopwatch Mode, you must go to the Timekeeping Mode first.

Sensor Modes

Digital Compass Mode

Press B.

▲

Barometer/

Thermometer Mode

▲

Altimeter Mode

▲

To set the time and date

1.	In the Timekeeping Mode, hold down A
	until the second digits start to flash, which
	indicates the setting screen.
2.	Press D to move the flashing in the

To reset the seconds count to zero

1. In the Timekeeping Mode, hold down A

until the second digits start to flash, which

indicates the setting screen.

sequence shown below to select other

settings.

2. Press E to reset the seconds count to 00.

• Pressing E while the seconds count is

in the range of 30 to 59 resets the

SecondsHourMinutes

12/24-Hour Format

Year Hour : Minutes

		seconds to 00 and adds 1 to the
		minutes. In the range of 00 to 29, the
	Month – Day	minutes count is unchanged.
	Month – Day	3. Press A to exit the setting screen.
		3. Press A to exit the setting screen.

Day		Month		Year

3.While a setting is flashing, use E(+) and B(–) to change it.

•When the 12/24-hour setting is selected, press E or B to toggle between 12-hour (12H) and 24-hour (24H) timekeeping.

4.Press A to exit the setting screen.