USER’S GUIDE 2550

To recall e-DATA MEMORY records

In the e-DATA MEMORY Mode, use keypad keys [2] through [9] to input the first letter of the record you want to recall.

To recall Telememo records

In the Telememo Mode, use keypad keys [2] through [9] to input the first letter of the name of you want to recall.

You can also scroll through records using [=] (forward) and [1] (back).

You can also scroll through records using [=] (forward) and [1] (back).

• Pressing a keypad key from [2] through [9] displays the first record whose first character matches the one you input. In this procedure, the letter input keys can input only letters for which there is corresponding data. If you have data starting with the letter “A” and “C” only, for example, each press of [2] cycles between input of “A” and “C” only. “2” and “B” are skipped in this case.

• Pressing the [0] key displays the remaining memory screen.

• Pressing [pm] displays the first record whose text starts with a character that is not

an alphabetic character, number, or space.

• You cannot use character input to recall a record whose first character is 0, 1, or a

space.

• If there is no record that starts with the character you specify using keys [2]

Name

Press.

Telephone number

•Press Dto toggle between the name and telephone number screens.

•Pressing a keypad key from [2] through [9]displays the first record whose first character matches the one you input. In this procedure, the letter input keys can input only letters for which there is corresponding data. If you have data starting with the letter “A” and “C” only, for example, each press of [2] cycles between input of “A” and “C” only. “2” and “B” are skipped in this case.

•Pressing the [0] key displays the remaining memory screen.

•Pressing the [pm] key displays the first record whose name starts with a character that is not an alphabetic character, number, or space.

through [9], the message Not Found appears for about one second.

• The text can show only five characters at a time, so longer text scrolls continuously

from right to left. Scrolling pauses for about one second when the end of the text is

reached. Press D to stop and restart scrolling.

• Pressing [=] while the last record is on the display or [1] while the first record is

on the display displays the remaining memory screen.

To edit an e-DATA MEMORY record

1.In the e-DATA MEMORY Mode, display the record you want to edit.

2.Hold down Auntil the flashing cursor appears on the display.

3.Use C (right) and D(left) to move the flashing to the character you want to change.

4.Use keypad keys to change the character.

• See “Inputting Text” for more information.

5.After making the changes you want, press A to store them and return to the e-DATA MEMORY record screen.

To delete an e-DATA MEMORY record

1.In the e-DATA MEMORY Mode, display the record you want to delete.

2.Hold down Auntil the flashing cursor appears on the display.

3.Hold down B until the message CLEAR appears on the display.

• After the record is deleted, the cursor appears on the display.

4.Input data or press Ato return to the remaining memory screen.

Telememo

 

 

The Telememo Mode lets you store up to 300 records,

Name

each containing name and telephone number data.

Records are automatically sorted based on the characters

 

 

 

 

of the name. You can recall records by scrolling through

 

 

them on the display or by inputting the first character of

 

 

the name.

 

 

 

 

• See “Sort Table” for details on how the watch sorts

 

 

records.

•All of the operations in this section are performed in the Telememo Mode, which you enter by pressing [3] while

Press .

Record

the Mode Menu is on the display.

 

(page)

 

 

number

 

Telephone number

To create a new Telememo record

•You cannot use character input to recall a record whose first character is 0, 1, or a space.

•If there is no record whose name starts with the character you specify using keys [2] through [9], the message Not Found appears for about one second.

•The name display can show only five characters at a time, so longer names scroll continuously from right to left. Scrolling pauses for about one second when the end of the name is reached.

•Pressing [=] while the last Telememo record is on the display, or pressing [1] while the first record is on the display displays the remaining memory screen.

To edit a Telememo record

1.In the Telememo Mode, display the record you want to edit.

2.Hold down A until the flashing cursor appears on the display.

3.Use C(right) and D (left) to move the flashing to the character you want to change.

4.Use keypad keys to change the character.

• See “Inputting Text” for more information.

5.After making the changes you want, press Ato store them and return to the Telememo record screen.

To delete a Telememo record

1.In the Telememo Mode, display the record you want to delete.

2.Hold down A until the flashing cursor appears on the display.

3.Hold down Buntil the message CLEAR appears on the display.

• After the record is deleted, the cursor appears on the display.

4.Input data or press A to return to the remaining memory screen.

Calculator

The Calculator Mode lets you perform addition, subtraction, multiplication, and division using 8-digit values (7 digits for negative values, because one digit is used by the minus sign).

•All of the operations in this section are performed in the

Calculator Mode, which you enter by pressing [=] while the Mode Menu is on the display.

To use the calculator

Use the keypad keys and the Dbutton to input the calculation you want to perform, and then press [=] to calculate the result. Be sure to press A to clear the calculator before beginning each calculation.

• Use the keypad keys to input values. Press [pm] to

input a decimal point.

• Use Dto input an arithmetic operator. Each press of D cycles through operators in

Remaining memory (%)

1. In the Telememo Mode, press [0] to display the

remaining memory screen.

• The value on the remaining memory screen is the

percentage of memory that is still available. It does

not indicate the number of records that can be stored.

• The maximum remaining memory value displayed is

99%, even when memory is empty.

• If FULL is shown for remaining memory, it means

the following sequence: + ➜ – ➜ x ➜ ⎟ ➜ + ➜, etc.

• If the result of a calculation exceeds 8 digits, an (error) indicator appears on the

display. You can press Aand continue with the calculation using the most

significant eight digits of the current value, if you want.

World Time

Cursor

that memory is full. To store another record, you will

first have to delete some of the records stored in

memory.

2. Hold down Auntil the flashing cursor appears on the

display. This is the name input screen.

3. Input up to eight characters for the name.

• Use the keyboard keys to input characters. Use C

(right) and D(left) to move the cursor around the

display. See “Inputting Text” for more information.

4. After you input the name, press C as many times as

necessary to move the cursor to the number input screen.

• When the cursor is located at the eighth space of the

name input screen, moving the cursor to the right

causes the number input screen to appear. When the

cursor is at the 12th digit of the number input screen,

moving it to the right (by pressing C) causes the

name input screen to appear.

• Pressing C moves the cursor the right, while D

City name

City code

Time zone indicator

Current time in the zone of the selected city code

World Time shows the current time in 100 cities* (26 time zones) around the world.

*Also included in the 100 cities are the U.S. time zones: Central ( CST), Mountain ( MST),

Pacific ( PST), and Eastern ( EST), and Greenwich Mean Time ( GMT).

•When the city (or time zone) that is currently selected in the World Time Mode is inside one of the time zone indicator zones, the corresponding time zone indicator appears. See “Displaying the Current Time” for more information.

•All of the operations in this section are performed in the World Time Mode, which you enter by pressing [4] while the Mode Menu is on the display.

moves it to the left.

To view the time in another city code

In the World Time Mode, use keypad keys [2] through [9] to jump to the following

5.Use the keypad keys to input the telephone number.

•Use [=] to input a space and [pm] to input a hyphen.

•The number area initially contains all hyphens. You can leave the hyphens or replace them with numbers or spaces.

•If you make a mistake while inputting numbers, use Cand D to move the cursor to the location of the error and input the correct data.

6.After the contents of the record are the way you want, press Ato store them.

•When you press A to store the record, the message SORT appears on the display for a moment. After that, the cursor appears in the name input screen, ready for input a new Telememo record.

7.Input more records (starting from step 3) or press A again to return to the Telememo record screen (without the cursor).

•The record (page) number is automatically assigned whenever you create a new record.

city names: ABUDHABI, DAKAR, GMT, JAKARTA, MADRID, PANAMA, TAIPEI, WARSAW. Pressing [0] displays your Home City.

Next, use [=] (forward) and [1] (reverse) to scroll through city names until the one you want is displayed.

•Pressing Dcycles the information in the top line of the screen in the sequence shown below.

GMT

Home City Time Home City Time

Differential

 

Differential

 

 

 

 

 

•World Time Mode city names are arranged in alphabetic order.

•For full information on city names and city codes, see the “City Code Table”.

•If the current time shown for a city is wrong, check your Timekeeping Mode time and Home City name settings and make the necessary changes.

3