USER’S GUIDE 2551
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, display the city code (time zone) whose Standard Time/Daylight Saving Time setting you want to change.
2. Hold down Afor about two seconds to toggle between Daylight Saving Time (DST displayed) and Standard Time (DST not displayed).
•The DST indicator is on the display whenever you display a city code for which Daylight Saving Time is turned on.
•Note that the DST/Standard Time setting affects only the currently displayed city code. Other city codes are not affected.
•Note that you cannot switch between Standard Time and Daylight Saving Time while GMT is selected as the city code.
Alarms
Alarm Operation
The alarm sounds at the preset time for about 20 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, until you turn the alarm off.
•Pressing any button or key stops the alarm tone operation.
•Performing any one of the following operations during a
Displaying the Timekeeping Mode setting screen Displaying the Alarm Sn setting screen
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn an alarm on and off
1.In the Alarm Mode, use [=] and [1] to select an alarm.
2.Press Ato toggle it on and off.
• Turning on a |
Alarm date (Month – Day)
Alarm number
Alarm time (Hour : Minutes)
You can set up to five independent
You can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour.
•There are five alarm screens numbered 1 through 4 for the
•All of the operations in this section are performed in the Alarm Mode, which you enter by pressing [5] while the Mode Menu is on the display.
•Holding down the [7] keypad key in the Alarm Mode displays the Timekeeping Mode time in the top line of the screen.
(x) on its Alarm Mode screen. Turning on the snooze alarm displays the snooze | |
alarm on indicator ( ) on its Alarm Mode screen. | |
• The applicable alarm on indicator (xor | ) is displayed in all modes when an |
alarm is turned on. |
|
• The applicable alarm on indicator (xor | ) flashes while the alarm is sounding. |
• The SNZ indicator flashes during the |
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use [=] and [1] to select the Hourly Time Signal (:00).
2. Press Ato toggle it on (ydisplayed) and off (ynot displayed).
• The Hourly Time Signal on indicator (y) is shown on the display in all modes while this function is turned on.
Countdown Timer
You can set the countdown timer within a range of one minute to 24 hours. An alarm sounds when the countdown
Alarm Types
The alarm type is determined by the settings you make, as described below.
•Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set.
•Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set.
•1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set, only during the month you set.
•Monthly alarm
1/10 second
Hours Seconds
Minutes
reaches zero.
•You can also select
•The countdown timer measurement operation continues even if you exit the Countdown Timer Mode.
•All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing [6] while the Mode Menu is on the display.
•Holding down the [7] keypad key in the Countdown Timer Mode displays the Timekeeping Mode time in the top line of the screen.
Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at the time you set, on the day you set.
To set an alarm time
1. In the Alarm Mode, use [=] and [1] to scroll through the alarm screens until the one whose time you want to set is displayed.
Press . Press .
•To set a
2.After you select an alarm, hold down Auntil the left hour digit of the alarm time starts to flash, which indicates the setting screen.
•This operation automatically turns on the alarm.
3.Use C and D to move the flashing in the sequence shown below to select other settings.
|
|
|
|
|
|
| Press . |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
| Hour |
| Minutes |
|
| Month |
|
| Day |
| Text |
| |
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Press . |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•Selecting the text causes the text input cursor (#) to appear. There are eight spaces in the text, so you have to press Ceight times to move to the Hour setting.
4.While a setting is flashing, use the keys and buttons to change it as described below.
Screen | To do this: | Do this: |
| Change the hour and minutes | Use the keypad to input values. |
|
| • To set an alarm that does not include a |
|
| month and/or day, leave the month or |
| Change the month and day | day settings as xx, or press [pm] to |
|
| input xx. Next, press Cto advance |
|
| to the next setting. |
| Input reminder text | • Use keypad keys to input characters. |
|
| • Use Cand Dto move the cursor. |
To set the countdown start time
1.In the Countdown Timer Mode, hold down A until the left hour digit of the countdown start time starts to flash,
which indicates the setting screen.
2. Use the keypad keys to input the countdown start time.
• You can also use Cand D to move the flashing between the digits.
• To set the start time to 24 hours, set 00:00.
3.Press Ato exit the setting screen.
To use the countdown timer
Press Dwhile in the Countdown Timer Mode to start the countdown timer.
•When the end of the countdown is reached and
•Press Dwhile a countdown operation is in progress to pause it. Press Dagain to resume the countdown.
•To completely stop a countdown operation, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value.
To turn auto-repeat on and off
1. In the Countdown Timer Mode, hold down A until the left hour digit of the countdown start time starts to flash, which indicates the setting screen.
2. Press B to toggle
3. Press Ato exit the setting screen.
• When
•Frequent use of
• See “Inputting Text”. |
•You must input separate values for each of the two digits of the hour, minutes, month, and day settings.
•While hour or minutes is flashing, press [pm] to toggle between AM (A indicator appears) and PM (P indicator appears).
•Holding down Bfor about one second while inputting reminder text clears the currently input reminder text.
5. Press Ato exit the setting screen. | |
on indicator | • Pressing D toggles the top line of the alarm screen |
| between the alarm date and the reminder text. |
•Reminder text appears on the Alarm Mode screen only.
If the reminder text is more than five characters long, it scrolls from right to left when displayed.
1/100 second
Hours Seconds
Minutes
The stopwatch lets you measure elapsed time, split times, and two finishes.
•The display range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds.
•The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it.
•The stopwatch measurement operation continues even if you exit the Stopwatch Mode.
•Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns to elapsed time measurement.
•All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing [pm] while the Mode Menu is on the display.
•Holding down the [7] keypad key in the Stopwatch Mode displays the Timekeeping Mode time in the top line of the screen.
4