USER’S GUIDE 2606
Day Counter Mode
The Day Counter Mode lets you count the number of days from the Timekeeping Mode’s current date to a specific target date.
This watch has five Day Counter records, each of which can be assigned up to 8 characters of text and a target date. Whenever the date specified by a day counter matches the date of the Timekeeping Mode (regardless of the day counter’s year setting), the DAYS indicator flashes on the Timekeeping Mode and Dual Time Mode screen. In the Day Counter Mode, the DAYS indicator flashes on the screen of the particular day counter whose date matches the date of the Timekeeping Mode.
•The initial default date for all Day Counters is January 1, 2001.
Mode indicator | Positive count value |
| indicates a future date, |
| while a negative value |
Text | indicates a past date. |
|
Year - Month - Day 
DAYS indicator
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To switch a daily Alarm or the Hourly Time Signal on and off
1.In the Alarm Mode, press D to select an alarm or the Hourly Time Signal.
2.When the alarm or Hourly Time Signal you want to is selected, press Bto switch it on and off.
•If any alarm is on, the Alarm on indicator is shown on the display when you change to another mode.
•If the Hourly Time Signal is on, the Hourly Time Signal on indicator is shown in any mode.
To test the alarm
In the Alarm Mode, hold down B to sound the alarm.
•Holding down Bto test the alarm also changes the Daily Alarm or Hourly Time Signal on/off settings.
Target date
Number of days
Stopwatch Mode
1/100 second The Stopwatch Mode lets you measure elapsed time, split
•The day counter on the display when you exit the Day Counter Mode appears first the next time you enter the Day Counter Mode.
Recalling Day Counter Data
In the Day Counter Mode, use Dand Bto scroll through the day counters.
To set the target date
1.In the Day Counter Mode, use Dor B to display the day counter you want to set.
2.Hold down Auntil the flashing cursor appears in the text area. This indicates the input screen.
3.Press Cto move the flashing in the sequence shown below.
• Holding down Cto move the cursor at high speed.
Press 
.
1st digit |
|
|
| 8th digit |
|
|
Day 
Month 
Year
4.While the cursor is in the text area, use D or Bto scroll through characters at the current cursor position. Characters scroll in the sequence shown below. Holding down either button scrolls at high speed.
Press 
. Press 
.
(Space) |
| A to Z |
| 0 to 9 |
5.While the cursor is in the date area, press Dto increase the number or Bto decrease it. Holding down either button changes at high speed.
•To clear a Day Counter record, press Dand Bat the same time while the cursor is in either the text area or number area. The message “CLR” appears on the display, the characters in the text area are deleted, and today’s date is set as the target date. After the clear operation is complete, you can create a new record by changing the date setting.
6.After you make the settings you want, press Ato exit the input screen.
•The date can be set within the range of January 1, 1940 to December 31, 2039.
Mode indicator | times, and two finishes. The range of the stopwatch is | |
23 hours, 59 minutes, 59.99 seconds. You can use the EL | ||
| ||
| backlight by pressing L at any time while the stopwatch | |
| is operating. |
|
|
|
|
|
|
|
|
|
|
|
|
Hours | Seconds |
|
|
|
|
| |||||
|
| Minutes |
|
|
|
|
| ||||
Elapsed time measurement |
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| |
Start |
| Stop | Stop | Clear | |||||||
Split Time measurement |
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| |
Start |
| Split | Split release | Stop | Clear | ||||||
Split time and |
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| |
Start |
| Split | Stop | Split release | Clear | ||||||
|
|
|
| First runner | Second runner | Record time of |
| ||||
|
|
|
| finishes. | finishes. | second runner. |
| ||||
|
|
|
|
|
|
| Record time of |
|
|
| |
|
|
|
|
|
|
| first runner. |
|
|
| |
Dual Time Mode
Alarm Mode
Alarm on indicator
Mode indicator | Hourly time signal on indicator |
| |
Current time |
|
AM indicator | Hour Minutes | Alarm number |
You can set up to five alarms. When a Daily Alarm is turned on, the alarm sounds for 20 seconds each day when the current Timekeeping Mode time matches the alarm time setting. Note that the alarm setting has no relation to the Dual Time Mode time. Press any button to stop the alarm after it starts to sound. When the Hourly Time Signal is turned on, the watch beeps every hour on the hour.
•The alarm on the display when you exit the Alarm Mode appears first the next time you enter the Alarm Mode.
To set the alarm time
1.In the Alarm Mode, use Dto display the number of the alarm you want to set. 
Alarm 1 
Alarm 2 
Alarm 3 
Alarm 4 
Alarm 5 
: 00 (Hourly Time Signal)
2.Hold down Auntil the hour digits start to flash on the display, indicating the setting
screen.
• At this time, the alarm is turned on automatically.
3.Press Cto move the flashing in the sequence shown below.
HourMinutes
4.Press Dto increase the selected digits and B to decrease them. Holding down either button changes the setting at high speed.
5.After you set the alarm time, press Ato exit the setting screen.
•The format
•When setting the alarm time using the
Home time
Mode indicator
Hour Seconds
Minutes
The Dual Time Mode lets you keep track of the time in another time zone.
To set the dual time
Press Dto increase the time by 30 minutes or B to decrease by 30 minutes.
•Holding down either button changes at high speed.
•Press A to set current time as the dual time. You can then make any changes you want.
•The format
•Changing the Timekeeping Mode setting causes a corresponding change in the Dual Time Mode time. If you ever need to change the Timekeeping Mode setting (say to set the time back three hours when you move from New York to Los Angeles), you should then make the necessary adjustment to the Dual Time Mode time (setting it back three hours, in this case).
2