MO0302-A

USER’S GUIDE 2534/2654

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to carefully read this manual and keep it on hand for later reference when necessary.

Expose the watch to bright light to charge its battery before using it.

You can use this watch even as its battery is being charged by exposure to bright light.

•Be sure to read “Battery” of this manual for important information you need to know when exposing the watch to bright light.

If the display of the watch is blank...

If the SLEEP indicator is on the display, it means that the display is blank because the watch’s Power Saving function has turned off the display to conserve power. Power Saving automatically turns off the display and puts the watch into a sleep state whenever your watch is left for a certain period where it is dark.

• The initial factory default setting is Power Saving on.

•The watch recovers from the sleep state if you move it to

a well-lit area*, if you press any button, or if you angle the watch towards your face for reading.

*It can take up to five seconds for the display to turn on.

•See “Power Saving Function” for more information.

General Guide

•Press Cto change from mode to mode.

•In any mode, press Lto illuminate the display.

Timekeeping Mode

Press C.

▲

Stopwatch Mode

H

Timekeeping

About This Manual

•Button operations are indicated using the letters shown in the illustration.

• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

(Light)

Telememo Mode

World Time Mode

▲

▲

 

▲

Alarm Mode

Countdown Timer Mode

 

▲

Hour : Minutes Seconds Year

Day of week

Month – Day

PM indicator

Use the Timekeeping Mode to set and view the current time and date.

To set the time and date

1.In the Timekeeping Mode, hold down Auntil the seconds start to flash, which indicates the setting screen.

2.Press Cto move the flashing in the sequence shown below to select other settings.

Seconds Hour Minutes 12/24-HourFormat

Power Saving Day Month Year

To create a new Telememo record

 

 

Name area

1. In the Telememo Mode, use B and Dto cycle through

 

 

the record screens until the new data screen appears.

 

 

 

 

 

 

 

 

• The new data screen is the one that is blank (contains

 

 

 

 

 

 

 

 

no name and telephone number).

 

 

 

 

• If the message FULL appears on the display, it

 

 

 

 

means that memory is full. To store another record,

 

 

 

 

you will first have to delete some of the records stored

Number

 

area

in memory.

 

 

2. Hold down Auntil the flashing cursor (_) appears in

 

 

 

 

 

New Data Screen

the name area of the display.

 

 

 

 

3. In the name area, use Dand Bto cycle through

 

 

 

 

characters at the cursor position. The characters cycle

 

 

 

 

in the sequence shown below.

3.When the setting you want to change is flashing, use Dand Bto change it as described below.

Setting

Screen

Button Operation

 

 

 

Seconds

 

Press D to reset to 00.

 

 

 

Hour, Minutes

 

Use D (+) and B (–) to change the setting.

 

 

 

12/24-Hour

 

Press Dto toggle between 12-hour (12H) and

Format

 

24-hour (24H) timekeeping.

 

 

 

Year,Month,Day

 

Use D (+) and B (–) to change the setting.

 

 

 

Power Saving

 

Press Dto toggle Power Saving on (ON) and

 

 

off (OFF).

 

 

 

4. Press Ato exit the setting screen.

•See “Power Saving Function” for details about configuring Power Saving settings.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all modes.

•The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

Telememo

Remaining memory The Telememo Mode lets you store up to 30 records, each containing name and telephone number data. Records are

 

automatically sorted based on the characters of the name.

 

You can recall records by scrolling through them on the

 

display.

 

• See “Sort Table” for details on how the watch sorts

Name

records.

 

• All of the operations in this section are performed in the

 

Telememo Mode, which you enter by pressing C.

Telephone number

 

Press D.

(space) A to Z 0 to 9 - . : /

Press B.

4.When the character you want is at the cursor position, press C to move the cursor to the right.

5.Repeat steps 3 and 4 until the name is complete.

•You can input up to eight characters for the name.

6.After you input the name, press Cas many times as necessary to move the cursor to the number area.

•When the cursor is located at the eighth space of the name area, moving the

cursor to the right causes it to jump to the first digit of the number. When the cursor is at the 12th digit of the number, moving it to the right (by pressing C) causes it to jump to the first character in the name.

7.In the number area, use Dand Bto cycle through numbers and symbols (hyphen, space) at the cursor position. The characters cycle in the sequence shown below.

Press D.

x 0 to 9 (space)

Press B.

8.When the character you want is at the cursor position, press C to move the cursor to the right.

9.Repeat steps 7 and 8 until you complete number input.

•You can input up to 12 digits for the number.

10.After inputting your data, press A to store it.

•After data storage is complete, the cursor appears in the name area of the display, ready for input of a new Telememo record.

11.Input more data (starting from step 3) or press A again to return to the Telememo record screen (without the cursor).

• The name can show only three characters at a time, so longer text scrolls continuously from right to left. The last character is indicated by the symbol after it.

1