Casio 2685 manual

To turn Alarms 2 through 5

MA0304-A

USER’S GUIDE 2685

About This Manual

∑Button operations are indicated using the letters shown in the illustration.

∑ Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

General Guide

∑Press Cto change from mode to mode.

∑In any mode, press Bto illuminate the display.

∑In any mode, hold down Cfor about two seconds to return to the Timekeeping Mode.

Timekeeping Mode	Alarm Mode	Countdown Timer	Stopwatch Mode	Dual Time Mode
		Mode

Press .

Timekeeping

PM indicator

Hour : Minutes

Month – Day

Seconds

Day of week

Use the Timekeeping Mode to set and view the current time and date.

To set the time and date

1.In the Timekeeping Mode, hold down Auntil the seconds start to flash, which indicates the setting screen.

2.Press Cto move the flashing in the sequence shown below to select other settings.

Seconds	Hour	Minutes
Day	Month	Year

To set an alarm time

1.In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is

displayed.

Press .

∑ To set a one-time alarm, display one of the screens indicated by an alarm number

from 2 through 5. To set the snooze alarm, display the screen indicated by 1.

2. After you select an alarm, hold down Auntil the hour setting of the alarm time

starts to flash, which indicates the setting screen.

3.When the setting you want to change is flashing, press Dto change it as described below.

To change this setting	Perform this button operation
Seconds	Press D to reset to 00.
Hour, Minutes, Year, Month, Day	Press D to increase the setting.

∑Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4.Press A to exit the setting screen.

∑The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

∑The year can be set in the range of 2000 to 2099.

∑The watch’s built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press Dto toggle between 12-hour timekeeping and 24-hour timekeeping.

∑With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m.

∑With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator.

∑The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes.

Alarms

∑ This operation automatically turns on the alarm.

3. Press Cto move the flashing in the sequence shown below to select other

settings.

Hour Minutes Month Day

4.While a setting is flashing, press Dto increase it.

∑To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set x for the month. Press Duntil the x mark appears (between 12 and 1) while month setting is flashing.

∑To set an alarm that does not include a day (Daily alarm, 1-Month alarm),

set xx for the day. Press Duntil the xx mark appears (between the end of the month and 1) while the day setting is flashing.

∑When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. or p.m. (P indicator).

5.Press Ato exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, until you turn the alarm off or change it to a onetime alarm.

∑To stop the alarm tone after it starts to sound, press any button.

∑Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen Displaying the alarm 1 setting screen

To test the alarm

∑In the Alarm Mode, hold down D to sound the alarm.

Alarm date (Month – Day)

Alarm time (Hour : Minutes)

Alarm number

You can set up to five independent multi-function alarms with hour, minutes, month, and day. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms can be configured as a snooze alarm or a one-time alarm, while the other four are one-time alarms.

You can also turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour.

∑There are five alarms numbered 1 through 5. You can configure Alarm 1 as a snooze alarm or a one-time alarm. Alarms 2 through 5 can be used as one-time alarms only.

∑All of the operations in this section are performed in the Alarm Mode, which you enter by pressing C.

and the Hourly Time Signal on and off

Hourly time signal	1. In the Alarm Mode, use Dto select a one-time alarm
	(alarm number 2 through 5) or the Hourly Time Signal
on indicator
	(:00).
	2. Press A to toggle it on and off.
	∑ The on/off status of Alarms 2 through 5 and the Hourly
	Time Signal is shown by indicators along the bottom of
	the displays.
	∑ The alarm on indicators and Hourly time Signal on
	indicator are displayed in all modes.
	∑ While an alarm is sounding, the applicable alarm on
	indicator flashes on the display.

Alarm Types

The alarm type is determined by the settings you make, as described below.

∑Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set.

∑Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set.

∑1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at time you set, only during the month you set.

∑Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at time you set, on the day you set.

Alarm on indicator

To select the operation of Alarm1

1.In the Alarm Mode, use Dto select Alarm1.

2.Press Ato cycle through the available settings in the sequence shown below.

Snooze on indicator (SNZ) and Alarm1 on indicator

Press .

One-time	Snooze	Alarm off
alarm on	alarm on

∑The snooze on indicator (SNZ) and Alarm1 on indicator are displayed in all modes.

∑The snooze on indicator (SNZ) flashes during the 5-minute intervals between alarms.

∑The alarm indicator (Alarm1 on and/or snooze on) flashes while the alarm is sounding.

1