USER’S GUIDE 2710
World Time
World Time shows the current time in 50 cities (27 time zones) around the world.
•All of the operations in this section are performed in the World Time Mode, which you enter by pressing C.
To view the time in another city code
In the World Time Mode, press D to scroll forward through the city codes.
GMT differential | Time |
City code 
Mode indicator
GMT differential | Current time in the zone of the selected city code |
•Selecting a city code causes the GMT differential screen to appear first, followed a short time later by the time screen.
•The GMT differential is the time difference between the time zone where the city is located and Greenwich Mean Time.
•For full information about city codes, see the “City Code Table” at the back of this manual.
•If the current time shown for a city is wrong, check your Timekeeping Mode time and Home City code settings and make the necessary changes.
To toggle World Time Mode times between standard time and Daylight Saving Time
In the World Time Mode, hold down A for about two seconds to toggle between Daylight Saving Time (DST displayed) and standard time (DST not displayed).
• The above operation toggles all World Time city codes between Daylight Saving Time and standard time. Note that you cannot make settings for individual city codes.
Data Bank Mode
| Name | The Data Bank Mode lets you store up to 30 records, | |||
|
|
|
| each containing name and telephone number data. | |
|
|
|
| Records are automatically sorted based on the | |
|
|
|
| characters of the name. You can recall records by | |
|
|
|
| scrolling through them on the display. | |
|
|
|
| • See “Character List” at the back of this manual for | |
|
|
|
| ||
|
|
|
| details on how the watch sorts records. | |
| Mode indicator | • All of the operations in this section are performed in | |||
Telephone number | the Data Bank Mode, which you enter by pressing | ||||
C. | |||||
|
|
|
| ||
Remaining memory
To create a new Data Bank record
To recall Data Bank records
In the Data Bank Mode, press D to scroll forward through Data Bank records on the display.
•The name and/or telephone number of the selected Data Bank record scrolls on the Data Bank record screen. The symbol 
indicates the first character of the name or telephone number follows next.
•Each press of A in the Data Bank Mode changes the scroll operation as shown below.
Name scrolls |
| Name stops |
| Name scrolls |
Number scrolls |
| Number scrolls |
| Number stops |
To edit a Data Bank record
1.In the Data Bank Mode, scroll through the records and display the one you want to edit.
2.Hold down A until the flashing cursor appears on the display.
3.Use C to move the flashing to the character you want to change.
4.Use D and B to change the character.
•For details on inputting characters, see “To create a new Data Bank record” (step 3 for name input and 7 for number input).
5.After making the changes that you want, press A to store them and return to the Data Bank record screen.
To delete a Data Bank record
1.In the Data Bank Mode, scroll through the records and display the one you want to delete.
2.Hold down A until the flashing cursor appears on the display.
3.Press B and D at the same time to delete the record.
•The message “CLR” appears to indicate that the record is being deleted. After the record is deleted, the cursor appears on the display, ready for input.
4.Input data or press A to return to the Data Bank record screen.
Alarms
|
| This watch has two alarms (Alarm 1 and Alarm 2), for |
|
| which you can make separate hour, minute, and day |
|
| of the week settings. |
|
| When an alarm is turned on, the alarm tone sounds |
|
| when the alarm time is reached by the Timekeeping |
|
| Mode digital time. |
|
| • Use the Alarm 1 and Alarm 2 Modes to set alarms. |
|
| You can enter an Alarm Mode using C. The setting |
|
| procedure is the same for both of the alarm |
Mode indicator | screens. | |
Alarm Types
The alarm type is determined by the settings you make, as described below.
•Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set.
•Weekly Alarm
Set the hour, minutes, and the day of the week for the alarm time. This type of setting causes the alarm to sound every week at the time you set, on the day of the week you set.
To set an alarm time
Name area
Number area
1.In the Data Bank Mode, press B and D at the same time to display the remaining memory screen.
•If the message “FULL” appears on the display, it means that memory is full. To store another record, you will first have to delete some of the records stored in memory.
2.Hold down A until the flashing cursor (
) appears in the name area of the display, which indicates the setting screen.
3.Use D and B to change the character at the cursor position in the name area. The character changes in the following sequence.
Day of week
1. After enter the Alarm 1 or Alarm 2 Mode, hold |
down A until the day of the week setting starts to |
flash, which indicates the setting screen. |
• This operation automatically turns on the |
corresponding alarm. |
2. Press C to move the flashing in the sequence |
shown below to select other settings. |
Day of week |
| Hour |
|
| Minutes |
|
Alarm time (Hour : Minutes)
3.While a setting is flashing, use D (+) and B
• To set an alarm that does not include a day of the week (daily alarm), set |
Press 
. 
Press 
.
(space) |
|
|
|
|
| A to Z |
|
|
|
|
|
| 0 to 9 | |||||||||||||
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4.When the character you want is at the cursor position, press C to move the cursor to the right.
5.Repeat steps 3 and 4 until the name is complete.
•You can input up to eight characters for the name.
6.After you input the name, press C as many times as necessary to move the cursor to the number area.
•When the cursor is located at the eighth space of the name area, moving the cursor to the right causes it to jump to the first digit of the number.
When the cursor is at the 16th digit of the number, moving it to the right (by pressing C) causes it to jump to the first character in the name.
7.Use D and B to change the character (hyphen, number, space, or plus) at the cursor position in the number area. The character changes in the following sequence.
Press . |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| 0 to 9 |
| (space) |
|
|
|
|
|
|
|
|
| |||||||||
Press . |
|
|
|
|
|
|
|
|
|
|
|
|
|
8.When the character you want is at the cursor position, press C to move the cursor to the right.
9.Repeat steps 7 and 8 until you complete number input.
•You can input up to 16 digits for the number.
10.Press A to store your data and return to the Data Bank record screen (without the cursor).
•When you press A to store data, the message “SORT” appears on the display for a while, indicating that data is being sorted. After the sort operation is complete, the Data Bank record screen appears.
“– – |
appears (between SUN and MON) while the day of the week setting is |
flashing. |
• When setting the alarm time using the |
time correctly as a.m. (no indicator) or p.m. (P indicator). |
4. Press A to exit the setting screen. |
Alarm Operation
The alarm sounds at the preset time for about 10 seconds, or until you stop it by pressing any button.
To test the alarm
While in the Alarm 1 or Alarm 2 Mode, hold down D to sound the alarm.
To turn an alarm on and off
Alarm 1 on | Alarm 2 on | 1. Enter the Alarm Mode (Alarm 1 or Alarm 2) you | ||
indicator | indicator | want to turn on or off. | ||
|
|
|
| 2. Press D to toggle the alarm on (alarm time |
|
|
|
| |
|
|
|
| displayed) and off (OFF displayed). |
|
|
|
| • The Alarm 1 on indicator indicates that Alarm 1 is |
|
|
|
| on, while the Alarm 2 on indicator indicates Alarm |
|
|
|
| 2 is on. |
|
|
|
| • Alarm on indicators are displayed in all modes. |
2
